P9632 - JBL Car Audio User Guide / Operation Manual

p9632 user guide / operation manual
165.03 KB
User Guide / Operation Manual
Car Audio

Read JBL P9632 User Guide / Operation Manual online

Automotive Loudspeakers
P - 4 3 2 ,   P - 5 3 2 ,   P - 6 3 2 ,   P - 9 6 3 2 ,   P - 9 6 3 3 ,  
P - 3 3 2 ,   P - 6 4 3 2 ,   P - 7 5 3 2 ,   P - 2 3 t   &   P - K i t   O w n er ’s   M a n u a l
G E N U I N E   J B L
P-Series Owner's Manual  5/25/99  9:46 AM  Page 1
Thank you
for purchasing JBL's Power
Series™ automotive loudspeakers. In
order that we may better serve you
should you require warranty service on
your new speakers, please retain your
original purchase receipt and return the
enclosed warranty registration card.
Important: Installation of automotive
stereo components can require extensive 
experience performing a variety of
mechanical and electrical procedures.
Although these instructions explain in a
general sense how to install Power Series
loudspeakers, they may not show the
exact installation methods for your 
particular vehicle. If you feel you lack the
tools or necessary experience, ask your
authorized JBL car-audio dealer about 
professional installation options.
Installation Warnings and Tips
• Always wear protective eyewear when 
using tools.
• Turn off all audio systems and other 
electrical devices before you start. 
Disconnect the negative (–) lead from 
your vehicle’s battery.
• Keep speakers in their package until 
final installation. When moving a 
speaker, always rest it with the cone or 
dome facing up. Never use force to 
install any speaker.
• Check clearances on both sides of a 
planned mounting surface before 
drilling any holes or installing any 
screws. Remember that the screws can 
extend behind the surface.
• At the installation sites, locate and 
make a note of all fuel lines, hydraulic 
brake lines, vacuum lines and electrical 
wiring. Use extreme caution when cut-
ting or drilling in and around these 
Caution: In some cars, fuel tanks may be
located directly beneath the rear deck.
Check for adequate speaker-basket 
clearance before considering use of 
this location!
• Before drilling for the speakers or 
cutting holes, use a utility knife to 
remove unwanted fabric or vinyl to 
keep material from snagging in a drill 
bit or saw.
• For door installations, check the 
clearance with the windows in both 
closed and open positions and verify 
that a mounted speaker will not 
interfere with the window crank or 
power-window mechanism. 
• If mounting speakers near rear-deck 
torsion bars, glove box or other 
structural elements, check for 
clearance first.
• Do not mount speakers where they 
will get wet.
Warning: Playing loud music in an auto-
mobile can permanently damage your
hearing as well as hinder your ability to
hear traffic. We recommend listening at
low levels while in your car. JBL accepts
no liability for hearing loss, bodily injury
or property damage resulting from use or
misuse of this product.
P-Series Owner's Manual  5/25/99  9:46 AM  Page 2
Figure 3.
Installation of the P-332, P-6432 and P-7532, as shown in Figure 1.
Figure 1.
Installation of the P-432, P-532, P-9632 and P-9633, as shown in Figures 2 and 3.
Figure 2.
Note: The P-332, P-6432 and P-7532 are designed as
direct replacements for original-equipment speakers 
mounted behind factory grilles.
Note: If you are mounting the P-532, P-9632 or P-9633
behind factory grilles, omit the grille and grille tray in 
Figure 2.
Note: Some installations may require some or all 
of the mounting ears to be removed from the P-432. 
Remove your original speakers first to determine
whether any mounting ears must be removed.
P-Series Owner's Manual  5/25/99  9:46 AM  Page 3
Using Intermount III™ in American and Japanese cars with
openings for 6-1/2" speakers.
Important: When using the steel mounting rings, you 
must make sure that the rings are mounted to a 
completely flat surface. 
Installation of the P-632, as shown in Figures 4a and 4b. The P-632 uses JBL's  Intermount III™
mounting system. Intermount III™ provides for easy installation of these speakers in many standard
and nonstandard locations that will accommodate a 6-1/2" speaker. 
Figure 4a.
Figure 4b.
P-Series Owner's Manual  5/25/99  9:46 AM  Page 4
Page of 8

Download JBL P9632 User Guide / Operation Manual

Here you can read online and download JBL P9632 User Guide / Operation Manual in PDF. P9632 user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair JBL P9632 Car Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.