Read Panasonic PT-RQ13K (serv.man2) Service Manual online
INF-26
SECTION 1 SERVICE INFORMATION
< RQ13K >
4.4.2. How to install the Interface Board
Screws (4 locations)
Screws (4 locations)
Salient
Guide groove
Slot cover
Fig. 1
Fig. 2
Fig. 3
1) Remove the slot cover. (Fig. 1)
f
. The
f
When removing the fourth screw, hold the slot cover with your hand so it will not fall.
2) Install the Interface Board to the projector. (Fig. 2)
f
the way in.
3) Fix the Interface Board. (Fig. 3)
f
T
1).
Attention
f
The removed slot cover is required when the unnecessary Interface Board is removed. Store it so it can be attached in the future.
4. 4. Installing the Interface Board (optional)
4.4.1. Before installing or removing
1. Always turn off the power of the projector before installing or removing the Interface Board.
2. Do not touch the connector section of the Interface Board directly with your hands.
・The component may be damaged by the static electricity.
3. Remove the static charge from your body by touching to surrounding metal, etc., in advance to prevent the static electricity
damage.
4. Take care not to get injured when installing or removing the Interface Board.
・Hands may be injured by the opening of the blank slot or the edge of the bracket of the Interface Board.
5. When installing the Interface Board to the slot, insert it into the connector straight and slowly.
Click on the first or last page to see other PT-RQ13K (serv.man2) service manuals if exist.