Read Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual online
3
PREFACE
< RCQ10 / RCQ80 >
There are special components used in this equipment which are important for safety. These parts are marked by 7 in the schematic
diagram, circuit board diagrams, exploded views and replacement parts list. It is essential that these critical parts should be replaced
with manufacturer’s specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of
manufacturer.
IMPORTANT SAFETY NOTICE
Caution:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Warning:
To assure continued compliance, follow the attached installation instructions. This includes using the provided power cord and shield-
ed interface cables when connecting to computer or peripheral devices. Also, any unauthorized changes or modifications to this equip-
ment could void the user’s authority to operate this device.
Notes on other repair services
f
When repairing a blown fuse, do not turn on the power after replacing only the fuse because it may cause a secondary
disaster such as smoke or fire. Turn on the power after confirming the cause of failure (structure, circuit, etc.) and taking
countermeasures.
f
After the repair service is complete, check that the product operates properly.
f
User setting information remains inside the product, so handle with care.
Intended use of the product
f
The purpose of the projector is to project a video signal from imaging equipment or a computer on a screen or other surface
as a still image or moving image.
Cautions when transporting
f
When transporting the projector, move the lens position to the home position and attach the lens protection material.
If lens sold separatelymodel, move the lens position to the home position, remove the projection lens, and attach the lens
hole cover.
f
Steps to move the lens position to the home position.
1) Press the <DEFAULT> button on the remote control while the lens shift adjustment screen is displayed.
2) Press q w to select [OK], and press the <ENTER> button.
f
Transport the projector with two or more people. Failure to do so may drop the projector, which may result in damage or
deformation of the projector, or injury.
f
Hold the bottom of the projector and do not hold the projection lens or the opening around the projection lens when trans-
porting. Failure to do so may cause damage. Also, handle the projector in a way not to apply excessive vibration or shock.
Failure to do so may cause a failure due to the damaged internal components.
f
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
Lens hole cover
Lens protection material
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.