Read Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual online
ADJ-5
SECTION 3 ADJUSTMENTS
< RCQ10 / RCQ80 >
1. 4. Wheel index adjustment
1. Enter the service mode, and select submenu [AUTO INDEX CALIBRATION] of [EXTRA OPTION].
2. The calibration confirmation window will appear. Select [OK] and press the <ENTER> button.
3. Wheel index adjustment pattern is projected automatically, auto-adjustment is started.
4. When the adjustment is complete "AUTO INDEX CALIBRATION COMPLETE" message is displayed.
Press the <MENU> button to finish the adjustment.
AUTO INDEX CALIBRATION
PROGRESS
EXIT
MENU
AUTO INDEX CALIBRATION
PROGRESS
EXIT
MENU
AUTO INDEX CALIBRATION
COMPLETE
EXIT
MENU
Error message
Probable cause
PW1 Sensor value is wrong
Measured value of luminance sensor is abnormal.
Replace the sensor and perform index adjustment again.
PW1 Sensor value is wrong
CW Sensor value is wrong
PW1 Adjustment was failed
Calculation error of PW1. Replace the PW1 and perform index adjustment again.
PW1 Sensor value is wrong
Calculation error of PW2. Replace the PW2 and perform index adjustment again.
CW Adjustment was failed
Calculation error of CW. Replace the CW and perform index adjustment again.
[When the message "AUTO INDEX CALIBRATION INCOMPLETE" is displayed]
AUTO INDEX CALIBRATION
INCOMPLETE
PW1 Sensor value is wrong
EXIT
MENU
AUTO INDEX CALIBRATION
OK
CANCEL
EXECUTE
CHANGE
ENTER
':64#126120
&;0#/+%)#//#/1&'
&%/5
10
10
5'.(%*'%-
#761+0&':%#.+$4#6+10
29+0&':
29+0&':
219'41((/'55#)'
'441415&
/1&'.
.+)*6#&,756
.+)*64706+/'4'5'6
/'075'.'%6
':'%76'
':'%76'
5*766'4-''2
1((
264%3
%9+0&':
q
w
'06'4
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.