Read Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual online
ADJ-7
SECTION 3 ADJUSTMENTS
< RCQ10 / RCQ80 >
①
③
②
4. Select [LAN] of connection method and setup the connection information to connect to the projector.
🅰 In case of known IP address of projector
• Select [Manual] and setup the [IP address, Port (Command Port)] and then click [Connect] button.
①
②
③
④
⑤
• After searching result, the available projectors are listed on the window as the below.
Check mark the projector for which you want to acquire the system log and then click [OK] button.
🅱 In case of unknown IP address of projector
• Select [Search] and setup the [IP Address/subnet mask] to the same network of the projector and [Port(Command
port)] and then click [Search] button.
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.