Read Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual online
ADJ-6
SECTION 3 ADJUSTMENTS
< RCQ10 / RCQ80 >
1. 5. EEPROM data transfer
f
Data backup and restore can be done via the LAN terminal. This function cannot be used with SERIAL terminal connection.
1. 5. 1. Equipment to be used
1. Computer : Use it for transferring of backup data.
2. Communication cable : LAN cable (When connecting directly, use a cross cable)
3. Service Software : LogTool.exe [Ver. 2.1.0.5~] Download from the projector service website.
1. 5. 2. Connection Preparations
1. Check the settings of the projector
1) Select the sub menu [DIGITAL LINK MODE] of main menu [NETWORK] and set it to [AUTO] or [ETHERNET].
2) Check the network IP address of the projector and take a note.
3) Set the IP address of computer to approximate (same network group) value of the projector IP address.
• If you have changed the each menu settings, please return settings to the original (users) after work.
2. Connect the projector and the PC by using a communication cable.
LAN cable (straight)
LAN cable (straight)
Projector LAN
Computer
Hub
Connection example
1. 5. 3. Backup the EEPROM data (before PCB exchange)
1. Switch the projector to "Normal-Standby" mode.
2. Start up service software [LogTool.exe] with a computer.
3. The projector connection setting window appears.
1) Select [Option] → [Password] to display the password input window.
2) Enter the service password [ 1565z ] and then click [OK] button.
①
②
③
• The e-mail address cannot be backup. After completing the work, you need to re-setup the e-mail address.
• The NFC activation cannot be backup if activated with the NFC upgrade kit. Explain it to users to reactivate.
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.