Read Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual online
ADJ-6
SECTION 3 ADJUSTMENTS
<MZ770/MW730>
1. 4. 4. Restore the data (after board replacing)
1. Set the projector to "Normal-Standby" mode (ON(G)/STANDBY(R) indicator lights in red).
2. Start up the software "ServiceMZ770.exe" with a PC.
3. Select language and click [OK] button.
4. 1) Choose the available serial port number on your PC.
2) Click [Data] button.
5. 1) Click [Transmission] button of Micom data.
2) Select the saved data file and click [Open(O)] button to start transferring the data.
3) The progress bar window will disappear when transferring is complete.
4) Restore the Gamma data and the Uniformity data in the same procedure of 1-3.
6. After completing the writing, turn the main switch off and on again, then check the projector operates correctly.
k
j
k
j
ServiceMZ770.exe
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.