Read Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual online
INF-6
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
Chapter 1 Preparation — About your projector
ENGLISH - 33
r
Connecting terminals
12
9
10
11
13
14 15
1
2
3
4
5
8
6
7
1 <DC OUT> terminal
This is the USB terminal only used for power supply. (DC 5 V,
maximum 2.0 A)
This can be used when the projector is in projecting status and
when power is to be supplied to the wireless display adapter,
etc.
2 <RGB 1 IN> terminals (<G/Y>, <B/P
B
>, <R/P
R
>, <SYNC/HD>,
<VD>)
This is a terminal to input the RGB signal or YC
B
C
R
/YP
B
P
R
signal.
3 <VIEWER/PAIRING> terminal
This is a terminal to connect the USB memory when using
the Memory Viewer function, pairing function, or data cloning
function.
4 <LAN> terminal
This is the LAN terminal to connect to the network.
This also supports the image transfer from the image transfer
application software.
5 <RGB 2 IN> terminal
This is a terminal to input the RGB signal or YC
B
C
R
/YP
B
P
R
signal.
6 <DIGITAL LINK/LAN> terminal
This is a terminal to connect a device that transmits video
signal or audio signal via the LAN terminal. Also, this is the LAN
terminal to connect to the network.
7 <VIDEO IN> terminal
This is a terminal to input video signal.
8 <HDMI 1 IN> terminal/<HDMI 2 IN> terminal
This is a terminal to input the HDMI signal.
9 <REMOTE 1 IN> terminal
This is a terminal to remotely control the projector using the
external control circuit.
10 <MONITOR OUT> terminal
This is a terminal to output the RGB signal or the YC
B
C
R
/
YP
B
P
R
signal input in the <RGB 1 IN> terminal or the <RGB 2
IN> terminal. When the input is switched to RGB1 or RGB2,
corresponding input signal is output.
11 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
12 <AUDIO IN 1> terminal/<AUDIO IN 2> terminal
This is a terminal to input audio.
13 <AUDIO IN 3> terminal
This is a terminal to input audio signal. There are right input
<R> and left input <L>.
14 <VARIABLE AUDIO OUT> terminal
This is a terminal to output the audio signal input to the
projector.
15 <REMOTE 2 IN> terminal
This is a terminal to connect the remote control with a cable
when controlling the projector with a wired remote control.
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
The signal may deteriorate due to the effect of noise or cable length.
f
The <DIGITAL LINK/LAN> terminal and the <LAN> terminal are connected inside the projector. When using both the <DIGITAL LINK/
peripheral devices such as a hub or twisted-pair-cable transmitter.
1. 4. Connecting terminals
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.