Read Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual online
INF-2
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
1. The name of each part
1. 1. Remote controls
Chapter 1 Preparation — About your projector
ENGLISH - 29
About your projector
Remote control
1
2
6
5
7
8
9
16
19
17
18
18
10
11
4
3
13
5
12
14
15
15
24
25
21
20
22
23
23
Front
Top
Bottom
1 Power <v/b> button
(v: Standby, b: Power on)
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is
switched off (standby mode).
2 Remote control indicator
Blinks if any button in the remote control is pressed.
3 Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)
Adjusts the focus, zoom, and lens shift of the lens.
4 <MENU> button/<RETURN> button/<ENTER> button/
asqw
buttons
Used to navigate through the menu screen.
asqw
asqw
buttons are also used to enter the password in
[SECURITY] or enter characters.
5 <VOL-> button/<VOL+> button
Adjusts the volume of the built-in speaker and the audio output.
6 <DEFAULT> button
Resets the content of the displayed sub-menu to the factory
default.
7 Input selection buttons (<HDMI 1>, <HDMI 2>, <DIGITAL
LINK>, <RGB1/2>, <VIDEO>, <NETWORK/USB>)
Switches the input signal to project.
8 Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple
projector environment.
9 <ON SCREEN> button
Switches the on-screen display function on (display) or off
(hide).
10 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
11 <ECO> button
Displays the setting screen relating to ECO management.
12 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed while in automatic adjustment.
Also used for cancel operation during digital zoom and the
operation of the Memory Viewer screen, or while the standby
screen for Panasonic APPLICATION input is displayed.
During MIRRORING input, the receiving device name and the
URL to access the projector are displayed at the top left of the
screen.
13 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
14 <TEST PATTERN> button
Displays the test pattern.
15 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment.
16 <SCREEN ADJ> button
Used to correct the distortion of the projected image.
17 <FREEZE> button
Used when pausing the image and turning off the audio.
18 <P-TIMER> button
Operates the presentation timer function.
19 <STATUS> button
Displays the projector information.
20 <D.ZOOM+> button/<D.ZOOM-> button
Enlarges or reduces the image.
21 <SHUTTER> button
Used when temporarily turning off the image and audio.
22 <MUTE> button
Used when temporarily turning off the audio.
23 <ASPECT> button
Switches the aspect ratio of the image.
24 Remote control signal transmitter
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.