Read Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual online
INF-5
SECTION 1 SERVICE INFORMATION
<MZ770/MW730>
Chapter 1 Preparation — About your projector
32 - ENGLISH
17 Luminance sensor
18 Control panel
19 Top slide cover
There is the wireless module connection terminal inside.
20 Burglar hook port
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
The components may deteriorate faster if cooling inside the projector is inhibited.
r
Control panel
6
3
7
8
8
1
3
4
5
5
2
1 Power <v/b> button
(v: Standby, b: Power on)
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is
switched off (standby mode).
2 <MENU> button
Displays or hides the main menu.
Returns to the previous menu when a sub-menu is displayed.
3 <VOL-> button/<VOL+> button
Adjusts the volume of the built-in speaker and the audio output.
4 <SHUTTER> button
Used to turn off the image and audio temporarily.
5 <ENTER> button
Determines and executes an item in the menu screen.
6 <INPUT SELECT> button
Switches the input signal to project.
7 <LENS/CANCEL> button
Adjusts the focus, zoom, and lens shift of the lens.
Also used for cancel operation during digital zoom and
operation in the Memory Viewer screen, or while the standby
screen for MIRRORING input or Panasonic APPLICATION input
is displayed.
8 asqw buttons
Selects an item in the menu screen, changes the setting, and
adjusts the level.
Also used to enter a password in the [SECURITY] menu or
enter characters.
1. 3. Control panel
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.