Read Panasonic PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE (serv.man11) Service Manual online
PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE
INF-11
4.2. Control through LAN
Connection and the method of command transmission are different according to the mode (the setting of Admin password
on WEB CONTROL). Control according to the procedure in 4.2.2. on the protection mode (the password is set), and
according to the procedure in 4.2.3. on the unprotected mode (the password is not set).
on WEB CONTROL). Control according to the procedure in 4.2.2. on the protection mode (the password is set), and
according to the procedure in 4.2.3. on the unprotected mode (the password is not set).
4.2.1 Examples of Connection
4.2.2 When WEB CONTROL Admin Password is set (Protection Mode)
4.2.2.1. Connection
1. Access IP address and the port number (default = 1024) of the projector, then connect to the projector with them.
P address and the port number can be accessed from the menu of the projector.
- IP address: MAIN MENU → NETWORK → NETWORK STATUS
- Port number: MAIN MENU → NETWORK → NETWORK CONTROL → COMMAND PORT
2. Receive a response message.
Response Message
3. Generate 32 bytes hash value (message digest) from the following data by using the MD5 (Message Digest Algorithm 5).
″xxxxxx:yyyyy:zzzzzzzz″
- xxxxxx: Administrator authority user-name on WEB CONTROL [default = "admin1"]
- yyyyy: Password corresponding to above-mentioned user-name (admin1) [default = "panasonic"]
- zzzzzzzz: 8 bytes random characters obtained from the response message
- : (colon): Separator
P address and the port number can be accessed from the menu of the projector.
- IP address: MAIN MENU → NETWORK → NETWORK STATUS
- Port number: MAIN MENU → NETWORK → NETWORK CONTROL → COMMAND PORT
2. Receive a response message.
Response Message
3. Generate 32 bytes hash value (message digest) from the following data by using the MD5 (Message Digest Algorithm 5).
″xxxxxx:yyyyy:zzzzzzzz″
- xxxxxx: Administrator authority user-name on WEB CONTROL [default = "admin1"]
- yyyyy: Password corresponding to above-mentioned user-name (admin1) [default = "panasonic"]
- zzzzzzzz: 8 bytes random characters obtained from the response message
- : (colon): Separator
4.2.2.2. Method of Command Transmission
Transmits command by the following format.
Transmission Data
Transmission Data
Header
Data section
End character
Hash value
(Refer to the step 3 in 4.2.1.1.)
‘ 0 ’
0x30
‘ 0 ’
0x30
Control command
(ASCII character string)
(CR)
0x0d
0x0d
32 bytes
1 byte
1 byte
Undefined length
1 byte
Reception Data
Header
Data section
End character
‘ 0 ’
0x30
‘ 0 ’
0x30
Control command
(ASCII character string)
(CR)
0x0d
0x0d
1 byte
1 byte
Undefined length
1 byte
Error Response
Error Message
End character
"ERR1" Command format error
"ERR2" Out of parameter
"ERR3" Busy or unavailable time
"ERR4" Timeout or unavailable time
"ERR5" Data length error
"ERRA" Invalid password
"ERR2" Out of parameter
"ERR3" Busy or unavailable time
"ERR4" Timeout or unavailable time
"ERR5" Data length error
"ERRA" Invalid password
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
(CR) 0x0d
4 bytes
1 byte
Data section
Space
Mode
Space
Random characters
End character
"NTCONTROL"
‘ ‘
‘ 1 ‘
‘ ‘
“zzzzzzzz”
(CR)
(ASCII character string)
0x20
0x30
0x20
(Hexadecimal ASCII code)
0x0d
9 bytes
1 byte
1 byte
1 byte
8 bytes
1 byte
Projector
LAN switch
Computer
LAN cable (straight)
LAN cable (straight)
Note: Use a proper LAN cable which is suitable for the PC to connect SERIAL connector and the PC.
Mode:1 = Protection mode
Click on the first or last page to see other PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE (serv.man11) service manuals if exist.