Read Panasonic PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE (serv.man11) Service Manual online
PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE
INF-8
3.3.2 Additional function of each menu
1. PICTURE menu
Additional Function for DYNAMIC IRIS.
- AI WINDOW: Sets the APL detection area.
2. POSITION menu
- DVI EQUALIZER: If noise appears when DVI input, sets the value so that the noise decreases.
3. ADVANCED Menu
- FRAME LOCK: When the input signal is RGB, FRAME LOCK is added.
4. PROJECTOR SETUP Menu
The following choices are added to "EMULATE " of the sub menu "RS-232C" setting.
- MODE_CH(Other companies model) - MODE_BA(Other companies model)
- MODE_NE(Other companies model) - MODE_SA(Other companies model)
- OTHER(Models other than the above-mentioned)
The following items are added to an indication screen of the sub menu "STATUS ".
Page 1 - APPROXIMATE TIME: Prediction remainder time of the filter in ACF.
Page 2 - BALLAST VERSION: Ballast Software Version
Additional Function for DYNAMIC IRIS.
- AI WINDOW: Sets the APL detection area.
2. POSITION menu
- DVI EQUALIZER: If noise appears when DVI input, sets the value so that the noise decreases.
3. ADVANCED Menu
- FRAME LOCK: When the input signal is RGB, FRAME LOCK is added.
4. PROJECTOR SETUP Menu
The following choices are added to "EMULATE " of the sub menu "RS-232C" setting.
- MODE_CH(Other companies model) - MODE_BA(Other companies model)
- MODE_NE(Other companies model) - MODE_SA(Other companies model)
- OTHER(Models other than the above-mentioned)
The following items are added to an indication screen of the sub menu "STATUS ".
Page 1 - APPROXIMATE TIME: Prediction remainder time of the filter in ACF.
Page 2 - BALLAST VERSION: Ballast Software Version
Page 2
- GEOMETRY VERSION: Geometry Software Version/FPGA Software Version
Page 2
- EMULATE – VERSION: Emulate Software Version
Page 4 - FM R VERSION: Formatter Software Version(Configuration/Main Application/Sequence/De-Gamma)
Page 4
- FM G VERSION: Formatter Software Version(Configuration/Main Application/Sequence/De-Gamma)
Page 4
- FM B VERSION: Formatter Software Version(Configuration/Main Application/Sequence/De-Gamma)
Page 5 - TEMP(°C): Intake air temperature / Exhaust air temperature / Optical module temperature
Page 5
- P.SENSOR: Brightness Sensor value
Page 5
- VOLT: Voltage of LAMP1/LAMP2
Page 5
- AIR FLOW: Sensor value / AD conversion value, Sensor Correction value/ AD conversion value
Page 5
- FAN MODE: FAN control mode
Page 5
- CLOG: Filter condition (NONE-)
Page 5
- R-EXST: Condition of Exhaust-R fan [rotational speed ]
Page 5
- C-EXST: Condition of Exhaust-C fan [rotational speed ]
Page 5
- L-EXST: Condition of Exhaust-L fan [rotational speed ]
Page 5
- INTAKE 1: Condition of Intake-1 fan [rotational speed ]
Page 5
- INTAKE 2: Condition of Intake-2 fan [rotational speed ]
Page 5
- LAMP 1: Condition of Lamp-1 fan [rotational speed ]
Page 5
- LAMP 2: Condition of Lamp-2 fan [rotational speed ]
Page 5
- P-UNIT: Condition of Power fan [rotational speed ]
Page 5
- BALLAST: Condition of Ballast fan [rotational speed ]
Page 5
- C-MIRROR: Condition of Synthetic Mirror fan [rotational speed ]
Page 5
- DMD-EXST : Condition of DMD Exhaust fan [rotational speed ]
Page 5
- C-PRISM : Condition of Color prism fan [rotational speed ]
Page 5
- DMD1 : Condition of DMD-1 fan [rotational speed ]
Page 5
- DMD2: Condition of DMD-2 fan [rotational speed ]
Page 6 - The ON/OFF history of the Lamp 1
Page 7
Page 7
- The ON/OFF history of the L 2amp
5.
SIGNAL LIST Menu
"PRIORITY MODE" item is enabled on the "REGISTERED SIGNAL STATUS".
It becomes easy to recognize an input signal to be a registered signal.
-OFF : Normal mode
-ON : Extended mode signal determination
-OFF : Normal mode
-ON : Extended mode signal determination
Click on the first or last page to see other PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE (serv.man11) service manuals if exist.