DP-2310, DP-23010 - Panasonic Copying Equipment Service Manual (repair manual). Page 95

95

DP-2310/3010

APR 2003

Ver. 1.00

The easiest method to recover the firmware in an Emergency Recovery routine is to either use the Local 
Firmware Update Tool software by selecting the Independent File method, or using the Master Firmware 
Flash Card method (3 Flash Cards required).

Whichever method you select, it is easier to restore the machine's firmware to the Standard (AAV) Type 
first as it only requires 3 files to bring the machine to initial working condition. (Install the files in this 
order: SC, SPC and PNL).

After recovering, if optional PCL or PS/PCL firmware is required, use the Network Firmware Update Tool 
or the Local Firmware Update Tool to update the firmware to the required level.

If the unit does not boot up properly, follow the steps below:

1. Turn the power Off (use the power switch on the back of the unit, not the side of the unit).

Before proceeding to the next step, you must prepare either the Local Firmware Update Tool or 
create the Master Firmware Flash Cards (read the appropriate sections first).

2. Turn the power On while holding the [ENERGY SAVER] button.
3. When the green lamp on the front panel turns On, release the [ENERGY SAVER] button.

The unit is now ready to accept the firmware code from the USB Port or Master Firmware Card.
Repeat the above steps if there are additional firmware code files to be updated.

DP-SFDL2 A A Vxxxxx

PU

Destination Code (Copier)

 PU : USA/Canada
 PB : UK

Destination Code (Fax)

 AU : USA/Canada
 AB : UK

Firmware Version (V1xxxx)
Language Code
  A : A-English, C-French & Spanish

 B : A-English, Spanish & Portuguese

Firmware Type

 A : Standard
 B, C, D, E : Optional

Model Number

(a)

(AU)

b : English, French & Spanish
g : German, French & Italian

Division Soft 
(When it is divided into (a) and (b))