DP-2000, DP-2500, DP-3000 - Panasonic Copying Equipment Service Manual (repair manual). Page 112

112

1.

Turn the Power Switch to the OFF (O) position.

2.

Install the Master Firmware Card into the machine.

3.

Turn the Power Switch to the ON (I) position.

4.

Press FUNCTION + ORIGINAL SIZE (LEDGER/A3) keys + Key 3 on the keypad
simultaneously.

5.

Perform the Service Mode F9-09 (PC 

→

 Flash Card).

6.

After the Flash Memory Card is erased, machine prompts “PROGRAM CARD?”. Press
“NO”.

7.

Press "RESET" first and then press FUNCTION + CLEAR keys simultaneously to return to
standby.

8.

Turn the Power Switch to the OFF (O) position.

9.

Remove the blank Flash Memory Card from the machine.

10. Insert another Master Firmware Card into the machine (if two 2 MB cards were used).
11. Turn the Power Switch to the ON (I) position.
12. Repeat from Step 4 above if you are erasing another Master Firmware Card.

DP-2500 A A V11502 PU

Country Code (Copier)

 PU : USA
 PB : UK

Country Code (Fax)

 AU : USA
 AB : UK

Firmware Version (V1.1502)

Language Code
  A : A-English, C-French & Spanish

 B : A-English, Spanish & Portuguese

Firmware Type

 A : Standard
 B : Optional

Model Number

(AU)

b : English, French & Spanish
g : German, French & Italian

10900

Firmware Version (V1.0900)

00600

Firmware Version (V0.0600)

40

Model Number

Firmware Version (V0026)

0026

02 01

Model Number (Small Category)

Revision Code

Model Number (Large Category)

05