Read Panasonic DP-2000 / DP-2500 / DP-3000 Service Manual online
110
3.4.2.
Updating the Firmware (Host) using the Master Firmware Card
A. When a 4 MB Flash Memory Card was used
1. Before starting, print the F5 & F6 Parameters (Copier) and Fax/Function Parameters (Fax) Lists.
2. Turn the Power Switch to the OFF (O) position.
3. Install the appropriate Master Firmware Card into the machine.
4. Turn the Power Switch to the ON (I) position.
5. Press FUNCTION + ORIGINAL SIZE (LEDGER/A3) keys + Key 3 on the keypad simultaneously.
6. Perform the Copy Service Mode F9-07-00 (Firmware Update Host Program (4MB)).
7. The firmware is copied into the machine.
8. After the update is completed, the machine reboots itself and returns to standby.
9. Perform the Copy Service Mode F9-06-00 (Parameter Initialization).
2. Turn the Power Switch to the OFF (O) position.
3. Install the appropriate Master Firmware Card into the machine.
4. Turn the Power Switch to the ON (I) position.
5. Press FUNCTION + ORIGINAL SIZE (LEDGER/A3) keys + Key 3 on the keypad simultaneously.
6. Perform the Copy Service Mode F9-07-00 (Firmware Update Host Program (4MB)).
7. The firmware is copied into the machine.
8. After the update is completed, the machine reboots itself and returns to standby.
9. Perform the Copy Service Mode F9-06-00 (Parameter Initialization).
10. Turn the Power Switch to the OFF (O) position.
11. Remove the Master Firmware Card from the machine.
12. Turn the Power Switch to the ON (I) position.
13. Reprogram the F5 & F6 Parameters (Copier) and Fax/Function Parameters (Fax) according to the
13. Reprogram the F5 & F6 Parameters (Copier) and Fax/Function Parameters (Fax) according to the
lists printed in Step 1 above if the settings are other than factory default.
B. When two 2 MB Flash Memory Cards were used
1. Before starting, print the F5 & F6 Parameters (Copier) and Fax/Function Parameters (Fax) Lists.
2. Turn the Power Switch to the OFF (O) position.
3. Install the Master Firmware Card (Part A) into the machine.
4. Turn the Power Switch to the ON (I) position.
5. Press FUNCTION + ORIGINAL SIZE (LEDGER/A3) keys + Key 3 on the keypad simultaneously.
6. Perform the Copy Service Mode F9-07-01 (Firmware Update Host Part A (2MB)).
7. The firmware is copied into the machine.
8. After the update is completed, the machine reboots itself and returns to standby.
9. Turn the Power Switch to the OFF (O) position.
2. Turn the Power Switch to the OFF (O) position.
3. Install the Master Firmware Card (Part A) into the machine.
4. Turn the Power Switch to the ON (I) position.
5. Press FUNCTION + ORIGINAL SIZE (LEDGER/A3) keys + Key 3 on the keypad simultaneously.
6. Perform the Copy Service Mode F9-07-01 (Firmware Update Host Part A (2MB)).
7. The firmware is copied into the machine.
8. After the update is completed, the machine reboots itself and returns to standby.
9. Turn the Power Switch to the OFF (O) position.
10. Remove the Master Firmware Card (Part A) and install the Master Firmware Card (Part B) into the
machine.
11. Turn the Power Switch to the ON (I) position.
12. Press FUNCTION + ORIGINAL SIZE (LEDGER/A3) keys + Key 3 on the keypad simultaneously.
13. Perform the Copy Service Mode F9-07-02 (Firmware Update Host Part B (2MB)).
14. The firmware is copied into the machine.
15. After the update is completed, press "RESET" first and then press FUNCTION + CLEAR keys
13. Perform the Copy Service Mode F9-07-02 (Firmware Update Host Part B (2MB)).
14. The firmware is copied into the machine.
15. After the update is completed, press "RESET" first and then press FUNCTION + CLEAR keys
simultaneously to return to standby.
16. Turn the Power Switch to the OFF (O) position.
17. Remove the Master Firmware Card from the machine.
18. Turn the Power Switch to the ON (I) position.
19. Perform the Copy Service Mode F9-06-00 (Parameter Initialization).
20. Reprogram the F5 & F6 Parameters (Copier) and Fax/Function Parameters (Fax) according to the
17. Remove the Master Firmware Card from the machine.
18. Turn the Power Switch to the ON (I) position.
19. Perform the Copy Service Mode F9-06-00 (Parameter Initialization).
20. Reprogram the F5 & F6 Parameters (Copier) and Fax/Function Parameters (Fax) according to the
lists printed in Step 1 above if the settings are other than factory default.
Click on the first or last page to see other DP-2000 / DP-2500 / DP-3000 service manuals if exist.