Read Panasonic FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 Service Manual online
■ What to check before the assembled
The Tape pasting on the left cannot
exceed the edge of the square.
The Tape pasting on the right should
cover the center of the RTC Battery.
exceed the edge of the square.
The Tape pasting on the right should
cover the center of the RTC Battery.
1. Put Key lock Bracket in
the slot in the Lower Case /
Speaker Ass'y.
the slot in the Lower Case /
Speaker Ass'y.
4. Insert the cables*3 as shown in the
figure, and then lock it.
figure, and then lock it.
2. Check whether all cables are
inserted well, and whether all tapes
are pasted.
3. Close the LCD to the lower cover.
inserted well, and whether all tapes
are pasted.
3. Close the LCD to the lower cover.
Note:
1.
1.
2.
3.
The groove side faces downwards.
Expose the white positioning line
on the back.
Do not touch the oil around by
hands.
There is no Wi-Fi antennas
in the corresponding the
LCD frame of Media PCB.
on the back.
Do not touch the oil around by
hands.
There is no Wi-Fi antennas
in the corresponding the
LCD frame of Media PCB.
Note:
Insert the cables parallelly to the end.
Insert the cables parallelly to the end.
Note:
The groove side of Key lock
Bracket is towards back
and downward.
The groove side of Key lock
Bracket is towards back
and downward.
7-20
Click on the first or last page to see other FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 service manuals if exist.