KX-VC500CX, KX-VCA001X - Panasonic PBX Service Manual (repair manual). Page 10

10

3. Connect a microphone.

Boundary Microphone (optional)
Connect the Boundary Microphone to the MIC jack on the back of the KX-VC500 using the proprietary cable ( 

 ).

• Use only the included cable.
• Push and turn the connector of the proprietary cable until it clicks. If the connector does not click, try reconnecting the cable 

with the top and bottom of the connector reversed.

General-purpose microphone
Connect the microphone to the Audio In  L/R jack on the back of the KX-VC500 using the stereo pin plug cable ( 

 ) after

amplifying the signal to line level using a device such as a microphone amplifier.
• Connect the microphone correctly, as follows:

- Left channel 

→ L

- Right channel 

→ R

• When connecting both the Boundary Microphone and a general-purpose microphone, both microphones can be used simulta-

neously

4. Connecting to the network

• Connect a router to the LAN jack on the back of the KX-VC500 using a category 5 or greater LAN cable ( 

 ).

• Set the hub/router to Auto Negotiation mode.
• If the system is set to 100M Full Duplex, it is necessary to change the system setting.
• Do not connect to a hub/router set to Half Duplex.
• Common LAN cables are straight and crossover type cables.
  Please confirm the type or the setting of the VPN router you are using before choosing a cable.
• For more details about routers and DCEs, refer to the documentation for each device.

5. Insert the included power cord ( 

 ) into the AC IN terminal on the back of the KX-VC500.

• Use only the included power cord.

6. Plug in the power cord into the power outlet.

• Choose an outlet that is convenient for plugging/unplugging.

This section describes how to connect a sub video camera. You can transmit images taken with the sub video camera to all parties.

1. Connect the sub video camera.

• Connect the sub video camera to the Sub Camera terminal on the back of the KX-VC500 using an HDMI cable.

• You can connect/disconnect the sub video camera during a video conference call.
• Only cameras that are HDMI-compatible (output resolution: 1080i) can be connected.
• For details on how to use the sub video camera for visual communication, refer to the Operating Manual.