KX-NS0130X - Panasonic PBX Service Manual (repair manual). Page 10

10

A stacking card to be installed in a KX-NS1000. Up to 2 legacy gateways can be connected.
This card can be used only with PCMPR Software Version 002.01000 or later.

Accessories (included): Screws x 4
User-supplied (not included): None*1
*1 The necessary stacking cable to connect the STACK-M card and the STACK-S (NCP) or STACK-S (TDE) card is included
with the STACK-S (NCP)/STACK-S (TDE/) card.

Up to 2 KX-TDA/KX-TDE/KX-NCP series PBXs can be connected to a KX-NS1000 and used as legacy gateways under the fol-
lowing conditions:

You cannot connect legacy gateways of mixed categories to a KX-NS1000.
The following table shows the category number for each type of PBX:

KX-NCP500 (category 1) and KX-NCP1000 (category 1): OK
KX-NCP500 (category 1) and KX-TDA100 (category 2): Not allowed

The following PBX models cannot be connected as legacy gateways:
• KX-TDA15
• KX-TDA30
• KX-TDA100D

Indication

Colour

Description

Link 1
Link 2

Green

Connection status indication for legacy gateway

• ON: Normal connection
• OFF: Connection error

Category

Model

1

KX-NCP500
KX-NCP1000

2

KX-TDE100
KX-TDE200
KX-TDA100
KX-TDA200

3

KX-TDE600
KX-TDE620
KX-TDA600
KX-TDA620