Read Panasonic UB-T580 / UB-T580W (serv.man5) Service Manual Supplement online
20
6 "SECTION 15 ADJUSTMENT"
Performing the following procedures (adjustment and others) will be required when replacing the CONTROL Board or
CMOS Camera-module Kit (CONTROL Board, CMOS Camera Module (L), and CMOS Camera Module (R)).
CMOS Camera-module Kit (CONTROL Board, CMOS Camera Module (L), and CMOS Camera Module (R)).
Note: Preparation
According to the Operating Instructions for UB-T580/T580W, make sure to install the "elite Panaboard
driver / software / book" beforehand.
driver / software / book" beforehand.
6.1.
"Section 15.1 When replacing CONTROL Board Only"
6.1.1.
"Section 15.1.1 Obtaining the Parameter File"
After replacing the CONTROL Board, it is necessary to save the parameter file (for the original CONTROL Board)
to the newly replaced CONTROL Board by using the Application Software for Service.
to the newly replaced CONTROL Board by using the Application Software for Service.
To obtain the parameter file, let us (Panasonic System Networks Co., Ltd.) know the Serial No. (for Product) on
the left side of the Name Plate attached on the rear side of this product via your sales company.
Also, if the **Serial No. Label for Service is attached to the Name Plate's immediate right, also inform us
(Panasonic System Networks Co., Ltd.) of the Serial No. (for Service).
Base on the above information, obtain the parameter file (for the original CONTROL Board).
the left side of the Name Plate attached on the rear side of this product via your sales company.
Also, if the **Serial No. Label for Service is attached to the Name Plate's immediate right, also inform us
(Panasonic System Networks Co., Ltd.) of the Serial No. (for Service).
Base on the above information, obtain the parameter file (for the original CONTROL Board).
Note: **Serial No. Label for Service
Effective only if the CMOS Camera-module Kit has been ever replaced.
6.1.2.
"Section 15.1.2 Replacing CONTROL Board"
Replace the CONTROL Board. (See 8.3.4.)
6.1.3.
"Section 15.1.3 Preparation for Saving the Parameter File"
(1) Extract the Application Software for Service "UB-T580_ServiceSoft.zip".
(For details, refer to "Service Soft Operating Manual" included in the "UB-T580_ServiceSoft.zip".)
(For details, refer to "Service Soft Operating Manual" included in the "UB-T580_ServiceSoft.zip".)
(2) Install the Driver for ServiceSoft to a PC.
(3) Confirm that LED (Green) on the elite Panaboard lights up when you connect the USB Cable
between the PC and the elite Panaboard.
between the PC and the elite Panaboard.
Click on the first or last page to see other UB-T580 / UB-T580W (serv.man5) service manuals if exist.