Read Panasonic UB-T580 / UB-T580W (serv.man5) Service Manual Supplement online
Order Number KM71207751SE
Category Number H19
Electronic Board (elite Panaboard)
Model No.
UB-T580
Model No.
UB-T580W
Subject : Addition
TABLE OF CONTENTS
PAGE
1 TOPICS OF MAIN CHANGED CONTENTS---------------- 2
2 “SECTION 8 DISASSEMBLY INSTRUCTIONS” --------- 3
2 “SECTION 8 DISASSEMBLY INSTRUCTIONS” --------- 3
2.1. “Section 8.1 Disassembly Flowchart”----------------- 3
2.2. “Section8.3 Boards”--------------------------------------- 4
2.2. “Section8.3 Boards”--------------------------------------- 4
3 “SECTION 9 TROUBLESHOOTING”------------------------ 6
3.1. “Section 9.1 LED Status” -------------------------------- 6
3.2. "Section 9.2 Error Message on PC" ------------------ 7
3.2. "Section 9.2 Error Message on PC" ------------------ 7
4 “SECTION 13 PARTS LOCATION AND MECHANI-
CALPARTS LIST’’------------------------------------------------- 8
4.1. “Section 13.1.1 Exterior for UB-T580”---------------- 9
4.2. “Section 13.1.2 Exterior for UB-T580W” ------------11
4.3. “Section 13.2.1 Packing for UB-T580” --------------13
4.4. “Section 13.2.2 Packing for UB-T580W”------------14
4.2. “Section 13.1.2 Exterior for UB-T580W” ------------11
4.3. “Section 13.2.1 Packing for UB-T580” --------------13
4.4. “Section 13.2.2 Packing for UB-T580W”------------14
5 “SECTION 14 REPLACEMENT PARTS LIST” ----------15
5.1. “Section 14.5 CONTROL Board ” --------------------16
6 "SECTION 15 ADJUSTMENT" -------------------------------20
6.1. "Section 15.1 When replacing CONTROL
Board Only" ------------------------------------------------20
6.2. "Section 15.2 When replacing CMOS
Camera-module Kit (CONTROL Board,
CMOS Camera Module (L), and CMOS
Camera Module (R) " ------------------------------------23
CMOS Camera Module (L), and CMOS
Camera Module (R) " ------------------------------------23
Please file and use this supplement manual together with the following service manuals.
1. The original Service Manual for UB-T580/T580W (Order No.: KM71201706CE)
2. Supplement-1 Manual for UB-T580/T580W (Order No.: KM71207751SE)
2. Supplement-1 Manual for UB-T580/T580W (Order No.: KM71207751SE)
2
1 TOPICS OF MAIN CHANGED CONTENTS
Remarks
1. Important level codes
A: High
B: Middle
C: Low
A: High
B: Middle
C: Low
2. Reason Codes
(1): Change Spec. (Product Number, Engineering Change, and others)
(2): Add information on Products UB-T580/T580W
(3): Correct
(1): Change Spec. (Product Number, Engineering Change, and others)
(2): Add information on Products UB-T580/T580W
(3): Correct
Section No.
(Original Service
Manual)
Contents
Reference Section on this
Supplement
Remarks
8
Add disassembly information for IR Board (R) and IR Board
(L)
(L)
2. "SECTION 8
DISASSEMBLY INSTRUCTIONS"
DISASSEMBLY INSTRUCTIONS"
B-(2)
9
Change the troubleshooting due to the addition of parts
(CMOS Camera-module Kit and CONTROL Board) to the
current spare parts
(CMOS Camera-module Kit and CONTROL Board) to the
current spare parts
3. "SECTION 9 TROUBLESHOOTING" A-(1)
13
Change and add part numbers
4. "SECTION 13 PARTS LOCATION
AND MECHANICAL PARTS LIST"
AND MECHANICAL PARTS LIST"
B-(2), B-(1)
14
Change the part numbers for CONTROL BOard
5. "SECTION 14 REPLACEMENT
PARTS LIST"
PARTS LIST"
B-(2), B-(1)
-
Add the explanation about the adjustment of screen-opera-
tion positioning with Application Software for Service
tion positioning with Application Software for Service
6. "SECTION 15 ADJUSTMENT"
A-(1)
3
2 “SECTION 8 DISASSEMBLY INSTRUCTIONS”
2.1.
“Section 8.1 Disassembly Flowchart”
The following flowcharts indicate disassembly sequence for the Exterior, Unit Components, and Circuit Board assemblies.
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
4
2.2.
“Section8.3 Boards”
2.2.1.
“Section 8.3.7 CMOS Camera Module (L)”
(1) Remove the Upper Cover L. (See 8.2.2.)
(2) Remove the 2 screws that secure the IR Board (L) to release
the board from the unit.
the board from the unit.
Note:
When adjusting the position of the CMOS Camera
Module (L), make sure to keep the connection between
the IR Board (L) and RELAY Board (on the left seen from
the front).
Module (L), make sure to keep the connection between
the IR Board (L) and RELAY Board (on the left seen from
the front).
(3) Remove the 2 screws that secure the CMOS Camera
Module (L).
Module (L).