NR-BN30PGW, NR-BN30PGB, NR-BN30PS1, NR-BN30QGW, NR-BN30QGB, NR-BN30QW1, NR-BN30QS1 - Panasonic Other Service Manuals Service Manual (repair manual). Page 23

Read Panasonic NR-BN30PGW / NR-BN30PGB / NR-BN30PS1 / NR-BN30QGW / NR-BN30QGB / NR-BN30QW1 / NR-BN30QS1 Service Manual online

 
 
23 
 
1) Slight electric leakage 
Electric insulation has deteriorated due to being affected with damp, thus resulting in slight electric 
leakage. 
 
2) Serious electric leakage 
Refrigerator case has become live due to faults occurred in some electric devices or the erroneous 
wiring in installing power cord plug or outlet by the user. This is very dangerous. 
 
3) Electric leakage test 
 
a) Slight electric leakage 
A tingle sense will be experienced as soon as you touch the metal parts of the refrigerator with your 
hand .When you test them with a test pencil, its neon lamp will come on .In that case, the first thing 
you need to do is to determine whether the grounding is perfect .If the grounding is no problem, turn 
off the refrigerator immediately, then check the insulation of electric circuits with an multimeter. 
 
b) Serious electric leakage 
Never touch the case body of the refrigerator, its door handle or other metal parts with your 
hand .Test the refrigerator with a test pencil, it will light up intensively ;measure the resistance 
between the power cord plug and the case body with an avometer, the reading will be zero (0
); in 
the worst case, the fuse will be blown .Check the 3-prong outlet to see whether the live wire and the 
null line are inversely connected, this makes the ground protection lead-out from the power cord 
plug being connected to the live wire .Another possibility is that the live wire and null line of the 
outdoor power supply circuit have been inversely connected accordingly, this makes the null line 
become a live wire . 
 
 
G .Stronger vibration and loader noise 
1) 
Refrigerator placed improperly 
a) Uneven ground 
Uneven ground will cause there frigerator to be placed unsteadily, causing stronger vibration and 
noise during its operation . 
 
b) Leveling screws not properly adjusted 
If the leveling screws on refrigerator legs have not been adjusted properly, vibration and noise will 
still occur even if the refrigerator has been placed on a level ground. 
 
2) 
Abnormal noise from compressor 
Three suspended spring inside the compressor case are out of balance, and strike against the case, 
moreover, the wear of compressor parts may cause noise sometimes. 
 
3) 
Resonance of tubing and loosening of parts 
Improper and compact laying of tubes or the loosening of parts may cause vibration and noise. 
 
 
Page of 40
Display

Click on the first or last page to see other NR-BN30PGW / NR-BN30PGB / NR-BN30PS1 / NR-BN30QGW / NR-BN30QGB / NR-BN30QW1 / NR-BN30QS1 service manuals if exist.