Read Panasonic KV-SS081 Service Manual online
38
F66:
Scanning unit-feed
error
Scanning unit-feed
error
B4 00 00 00 1. Scanning unit-feed
mechanism has some
problems.
problems.
1. Execute "Carriage Test" in Sec. 9.3.5
to check whether this phenomenon is
reproduced.
2. Check the mechanical condition of
the belt and gears on the Motor Assy.
3. Check the belt tension controlled by the
Idle Pulley Assy.
4. Check the Shaft for the Scanning Unit
is properly assembled.
5. Replace faulty parts.
to check whether this phenomenon is
reproduced.
2. Check the mechanical condition of
the belt and gears on the Motor Assy.
3. Check the belt tension controlled by the
Idle Pulley Assy.
4. Check the Shaft for the Scanning Unit
is properly assembled.
5. Replace faulty parts.
2. Motor drive signals from the
CONTROL Board are not
transmitted to the Carriage
Motor.
CONTROL Board are not
transmitted to the Carriage
Motor.
1. Check the following connection and
soldering condition on each connector:
(1) J5 (CONTROL Board) to Carriage
Motor
(2) J2 (CONTROL Board) to AC
Adaptor
2. Replace faulty parts.
soldering condition on each connector:
(1) J5 (CONTROL Board) to Carriage
Motor
(2) J2 (CONTROL Board) to AC
Adaptor
2. Replace faulty parts.
3. Scanner is not put on a
horizontal level area.
horizontal level area.
Set the scanner on a horizontal level area.
F67:
Scanner can’t find
the reference mark.
Scanner can’t find
the reference mark.
B7 00 00 00 The scanning Unit receives an
excessive exposure to the
sunlight or other light.
sunlight or other light.
1. Close the Document Cover.
2. Retry the image scanning.
2. Retry the image scanning.
Error Code
Possible Cause
Check Point
Remarks
Classification
Code
ST1 ST2 ST3 ST4
Click on the first or last page to see other KV-SS081 service manuals if exist.