76GF-64H (serv.man9). Split - Part 3 - TV operation, Audio adjustments - page 10-15 - Sharp TV User Guide / Operation Manual

76gf-64h (serv.man9) user guide / operation manual
Model
76GF-64H (serv.man9)
Pages
6
Size
1.43 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
TV / CTR / Split - Part 3 - TV operation, Audio adjustments - page 10-15
File
76gf-64h-sm9.pdf
Date

Read Sharp 76GF-64H (serv.man9) User Guide / Operation Manual online

10
Web-site: www.sharp.co.uk/support
Help Line (office hours only): 08705 274277
Channel selector buttons 
E/F
Select the programme channel number you want to see, using the
channel selector buttons 
E
or
F
.
When you press these buttons the list of programmes appears. 
Press the  
E
or
F
again to select another program.
Note: The channels that are in SKIP mode cannot be seen with these
buttons. Use numeric buttons to display these channels.
 
Single/Double entry selector button 
6
This button selects between one or two digit channel number entry.
0~9 Digit buttons
~
You can select channels by pressing the 0 ~ 9 digit buttons on the remote control.
(For single and double digit entry see section B above).
Flash-back button 
Press this button to change from the current channel to the channel previously selected. Press the button again to switch
back to the original channel.
Channel Selection
TV OPERATION
Single digit
entry mode
Double digit
entry mode
Previously
viewed channel
Currently
viewed channel
11
Picture Adjustments
Picture quality is adjustable in this menu.
1.
Press the MENU button 
to see the MAIN Menu.
2.
Press the RED button 
to see the PICTURE LEVELS Menu
PICTURE LEVELS Menu
3.
Press the Cursor LEFT/RIGHT buttons 
/
to choose one of
six setting: Factory settings / Memorized / Cinema / Rich / Game /
Auto (OPC) [ 
].
4.
Press the Cursor UP/DOWN buttons 
E
F
to select an
option  from the list: Contrast, Colour, Brightness or Sharpness.
The red point mark indicates the selected parameter.
5.
Adjust the picture quality to your liking with the Cursor
LEFT/RIGHT buttons 
/
I
.
6.
Press the GREEN button 
if you wish to memorize the
“Personal” levels in the “Memorized” position of PICTURE MODE.
In this menu you can switch to the following menus:
Press the YELLOW button 
to see the ADVANCED Menu
(refer page 12).
Press the BLUE button 
to see the OTHERS Menu (refer page
12).
7.
Press the MENU button 
to close the PICTURE Menu.
MAIN Menu
PICTURE LEVELS Menu
About PICTURE MODE Auto: This function allows the automatic adjustment of the picture contrast proportionate 
to the rooms light via OPC (Optical Picture Control).
12
Web-site: www.sharp.co.uk/support
Help Line (office hours only): 08705 274277
ADVANCED Menu
1.
Press the Cursor UP/DOWN buttons  
E
/  
F
to select
one of the following parameter from the list: OSD contrast, Tint
control, NTSC Hue control, ECO mode or SVM. The red point mark
indicates the selected parameter.
2.
Press the Cursor LEFT/RIGHT buttons  
/
I
to adjust picture
quality to your liking.
Select OSD contrast to adjust the contrast level of the On Screen
Display menus.
Select Tint control to adjust your desired skin colour (Cool or Warm).
Select NTSC Hue control to adjust the skin colour (Green or Red)
during NTSC signal reception through the external connectors.
Select ECO mode “On” to attenuate the contrast in the excessively
white areas of the picture.
Select SVM (Scan Velocity Modulator) to change the resolution of the
picture (Low, Medium or High). The TV is factory pre-set to ‘Medium’.
In this menu you can switch to the following menus:
Press the RED button 
to return to the LEVELS Menu.
Press the BLUE button 
to see the OTHERS Menu. 
3.
Press the MENU button 
to close the ADVANCED Menu.
OTHERS Menu
1.
Press the Cursor UP/DOWN buttons 
E
F
to select:
Comb filter, Black level expander or Rotation. The red point mark
indicates the selected item.
2.
Press the Cursor LEFT/RIGHT buttons  
/
I
to select ON/OFF.
Select Comb filter (ON) to reduce the colour interference in picture
with fine details and the picture gets sharper.
Select Black level expander (ON) to activate the Dynamic
Compensation in the dark area of the picture.
Select Rotation to rotate the picture until the lines are perfectly
horizontal.
In this menu you can switch to the following menus:
Press the RED button 
to return to the LEVELS Menu.
Press the YELLOW button 
to return to the ADVANCED Menu.
3.
Press the MENU button 
to close the OTHERS Menu.
ADVANCED Menu
OTHERS Menu
13
Wide Mode Fast Menu
With this menu you can select the width of the picture: AUTO,
PANORAMA, FULL, NORMAL, ZOOM 14:9 or CINEMA, by pressing
the WIDE MODE 
button.
Each time you press the WIDE MODE button, the width of the picture
changes as indicated:
AUTO
*
v
PANORAMA
v
FULL
v
NORMAL
v
ZOOM 14:9
v
CINEMA
When you Select: PANORAMA, ZOOM 14:9 or CINEMA, 4 options
appear on the screen:
V-SCROLL: Press the RED button to see the Vertical SCROLL
menu.
V-SIZE: Press the GREEN button to see the Vertical SIZE menu.
NORMALIZE: Press the YELLOW button to normalize the Vertical 
SCROLL and SIZE,.
EXIT: Press the BLUE button to quit the menu.
V-SCROLL menu: Press the Cursor LEFT/RIGHT buttons 
/
I
to adjust the Vertical SCROLL (UP/DOWN).
V-SIZE menu: Press the Cursor LEFT/RIGHT buttons  
/
I
to adjust the Vertical SIZE (LARGE/SMALL).
AUTO mode (VPS code): The VPS signal is sent by some broadcasting stations with information of the original size.
When the TV is in AUTO mode and receives the VPS signal, it changes the size automatically as indicated below:
When the TV is receiving VPS code 16:9 the TV selects CINEMA automatically.
When the TV is receiving VPS code 14:9 the TV selects ZOOM 14:9 automatically.
When the TV is receiving VPS code 4:3 the TV selects PANORAMA automatically.
When the TV does NOT receive VPS code the TV selects PANORAMA automatically.
External source: When you are watching the TV-set through the Euro-SCART AV-1 or AV-2 terminals and it receives
information of 16:9 format (through the audio-video control pin) the TV selects FULL automatically.
WIDE MODE Button
Vertical SIZE menu
Vertical SCROLL menu
BLUE
BLUE
BLUE
BLUE
Page of 6
Display

Download Sharp 76GF-64H (serv.man9) User Guide / Operation Manual

Here you can read online and download Sharp 76GF-64H (serv.man9) User Guide / Operation Manual in PDF. 76GF-64H (serv.man9) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp 76GF-64H (serv.man9) CTR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.