Read Panasonic KV-S7065C (serv.man2) Service Manual Supplement online
11
4.3.2.
“Section 9.3.5 Scanner Condition”
Item
Operation
Default
Remarks
Sleep Mode
1. Click “Sleep Mode” on the main menu (Service Utility).
2. Set “Waiting Time” (minutes) to change
sleep mode.
3. Click “OK” to renew the setting.
sleep mode.
3. Click “OK” to renew the setting.
15 minutes
When returning back
to the Ready Mode
from the Sleep Mode,
execute “Sleep Mode”
for Test (9.3.6) on the
main menu, and then
click “STOP” on the
“Sleep Mode” dialog
box.
to the Ready Mode
from the Sleep Mode,
execute “Sleep Mode”
for Test (9.3.6) on the
main menu, and then
click “STOP” on the
“Sleep Mode” dialog
box.
Clear Imprinter
1. Click “Clean Imprinter” on the main menu to clean an ink jet
head to print.
head to print.
—
This item is available
only when the optional
Imprinter is installed to
the scanner.
only when the optional
Imprinter is installed to
the scanner.
Paper Mode /
Buzzer Setting
Buzzer Setting
1. Click “Paper Mode / Buzzer Setting” on the main menu.
2. Set “Paper Mode (A4 or Letter)” and/or “Buzzer Setting
(ON or OFF)” on “Paper Mode / Buzzer Setting” dialog
box.
3. Click “OK” to renew the setting.
2. Set “Paper Mode (A4 or Letter)” and/or “Buzzer Setting
(ON or OFF)” on “Paper Mode / Buzzer Setting” dialog
box.
3. Click “OK” to renew the setting.
Compatible Mode 1. Click “Compatible Mode” on the main menu.
2. Set a model number to operate the scanner as the emulation
mode on “Compatible Mode” dialog box.
3. Click “OK” to renew the setting.
mode on “Compatible Mode” dialog box.
3. Click “OK” to renew the setting.
User Shading
1. Click “User Shading” on the main menu.
2. Push “Start Shading” or “Restore Default” on “User
Shading” dialog box.
2. Push “Start Shading” or “Restore Default” on “User
Shading” dialog box.
Note:
a. When selecting “Restore Default”, the factory-setting
data will be overwritten in stead of the current
shading data.
b. The following procedures “3” or more are available
only for selecting “Start Shading”.
data will be overwritten in stead of the current
shading data.
b. The following procedures “3” or more are available
only for selecting “Start Shading”.
3. Clean the conveyor, rollers, and ADF glasses according to
the message on the display.
the message on the display.
And click “OK”.
4. Reverse Reference Plates to white according to the message
on the display.
on the display.
And click “OK”.
5. Set the accessory Shading Paper or Shading Paper
(Part No.: See 14.7.) on the Hopper Tray in the landscape
orientation.
(Part No.: See 14.7.) on the Hopper Tray in the landscape
orientation.
And click “OK”.
6. Scan the Shading Paper.
7. Reverse the Reference Plates to black according to the
message on the display.
And click “OK”.
8. Click “OK” to get back to the main menu.
7. Reverse the Reference Plates to black according to the
message on the display.
And click “OK”.
8. Click “OK” to get back to the main menu.
1. Before executing the
shading function, be sure to
clean ADF Glasses, rollers,
and conveyors related to
convey documents.
shading function, be sure to
clean ADF Glasses, rollers,
and conveyors related to
convey documents.
2. Do not stop the shading
execution on its way and
do not open any doors.
execution on its way and
do not open any doors.
Warning Setting
1. Click “Warning Setting” on the main menu.
2. Change the parameter on “Warning Setting” dialog box.
3. Click “OK” to renew the setting.
2. Change the parameter on “Warning Setting” dialog box.
3. Click “OK” to renew the setting.
Clean:
20000
Replace:
300000
Set Default
1. Click “Set Default” on the main menu.
2. Click “Set Default” on the “Set Default”
dialog box to set “Sleep Mode”, “Warning
Setting”, and “Feed Speed” to the default.
dialog box to set “Sleep Mode”, “Warning
Setting”, and “Feed Speed” to the default.
3. Click “Close” to get back to the main menu.
—
Click on the first or last page to see other KV-S7065C (serv.man2) service manuals if exist.