Read Panasonic NU-SC300BZPE Service Manual online
8. Release the clips fixing wire harness.
9. Remove 5 screws holding D.P.C. (FU) board on the
escutcheon base.
10. Release 4 catch hooks fixing D.P.C. (FU) board.
11. Disconnect connector from D.P.C (FU) board.
11. Disconnect connector from D.P.C (FU) board.
5.5. Convection Heater (Heater
CU), Convection Motor
1. Remove cabinet body (same as 5.1 step 1 ~ step 3).
2. Pull out exhaust pipe from exhaust cover.
3. Remove 1 screw fixing exhaust cover, and then remove the
2. Pull out exhaust pipe from exhaust cover.
3. Remove 1 screw fixing exhaust cover, and then remove the
exhaust cover.
4. Remove 5 screws fixing rear plate, and remove rear plate.
5. Disconnect connectors from convection module.
a. Remove 2 screws from convection heater’s terminals.
b. Disconnect 2 connectors from convection motor
b. Disconnect 2 connectors from convection motor
terminals.
c. Disconnect 4 connectors from thermal cutout.
14
NU-SC300B
Click on the first or last page to see other NU-SC300BZPE service manuals if exist.