Read Panasonic NU-SC300BZPE Service Manual online
7. Remove 1 screw holding thermistor on upper right corner of
the oven, bend the flang and remove the thermistor.
8. Disconnect connectors.
• Disconnect all connectors from left side of the oven.
• Disconnect all connectors from right side of the oven.
• Disconnect all connectors from right side of the oven.
9. Pull out pipe (water inlet pipe) from the left side of the oven.
10. Turn over the oven (Upside down).
11. Remove 4 screws holding left and right drip tray. (2 for left
and 2 for right)
12. Remove 12 screws.
• Remove 2 screws holding rear plate (mark
).
• Remove 6 screws holding left and right hinges (mark
).
• Remove 4 screws holding flanging of the oven front
plate (mark
).
13. Push and lift the base U to the front of the oven, thus to
remove the base U from oven cavity.
18
NU-SC300B
Click on the first or last page to see other NU-SC300BZPE service manuals if exist.