Read Panasonic NU-SC300BZPE Service Manual online
5.4. Digital programmer circuit
(D.P.C.) FU
NOTE:
Be sure to ground any static electric charge built up on
your body before handling the D.P.C.
your body before handling the D.P.C.
1. Same as 5.2 Step1~Step7.
2. To remove door C.
2. To remove door C.
• Insert flat blade screwdriver into the gap between door
C and door A, it is beginning from hinge pin parts.
• Release catch hooks between door C and door E, to
detach the door C.
3. Remove 12 screws from door E. (10 screws for fixing door
E, 2 screws for fixing door keys.)
(Note: Please pay attention the type of the screw to
avoid mixture.)
(Note: Please pay attention the type of the screw to
avoid mixture.)
4. Remove door EU.
5. Remove door B and door screen C.
5. Remove door B and door screen C.
6. Remove 8 screws holding escutcheon base.
(Note1: One of the screw located under the black
cushion rubber.)
(Note2: Please pay attention the type of the screw to
avoid mixture.)
cushion rubber.)
(Note2: Please pay attention the type of the screw to
avoid mixture.)
7. Remove escutcheon base from door U.
(Hold the bottom of escutcheon base and pull it out.)
13
NU-SC300B
Click on the first or last page to see other NU-SC300BZPE service manuals if exist.