Read Panasonic NU-SC300BZPE Service Manual online
5.3. Heater FU (High Temperature
Steam Heater), Heater DU
(Steam Heater)
(Steam Heater)
1. Remove 2 screws holding thermal cutout bracket on the
steam heater.
5.3.1. Heater FU (High Temperature
Steam Heater )
1. Disconnect 2 connectors from heater FU terminals.
2. Remove 1 screw holding thermistor.
3. Remove 4 screws holding heater FU.
4. Slide upward the heater FU, and then take it down.
5. Pull out 2 connect pipes between heater FU and heater DU.
5. Pull out 2 connect pipes between heater FU and heater DU.
NOTE:
Before installing thermistor, please fill enough silicon grease into the
installation hole of heater FU for good conductibility.
Before installing thermistor, please fill enough silicon grease into the
installation hole of heater FU for good conductibility.
11
NU-SC300B
Click on the first or last page to see other NU-SC300BZPE service manuals if exist.