Read Panasonic EW1035-E2 Service Manual online
- 4 -
3. Take out the Driving block and remove the Rechargeable battery as a to c below. (See Figure 3)
Caution:
You cannot disassemble the Driving block and the PCB block so as to maintain the product efficiency.
Procedures
Caution:
You cannot disassemble the Driving block and the PCB block so as to maintain the product efficiency.
Procedures
a. Lift the 2
nd
coil block a little and remove the Gas release connector.
b. Remove the Battery O-ring plate.
c. Remove the Rechargeable battery.
DISASSMBLY OF THE RECHARGEABLE BATTERY
1. Be careful not to disfigure the Battery terminal of the Chassis. (See Figure 4)
*Remove the Battery O-ring plate first and remove the Rechargeable battery. If you remove the
Rechargeable battery with the Battery O-ring plate on forcedly, the Battery terminal may be deformed.
2. Be careful not to disfigure the Connection terminals of the 2
nd
coil, etc. (See Figure 5)
Click on the first or last page to see other EW1035-E2 service manuals if exist.