Read Panasonic EW1035-E2 Service Manual online
- 5 -
3.
ASSEMBLY INSTRUCTIONS
1. First, insert the Cathode side of the Rechargeable battery. (See Figure 6)
2. After installing the Rechargeable battery, insert the Battery O-ring plate to the Battery terminal.
3. Install the Gas release connector.
4. Install the Driving block in to the Main body housing. (See Figure 7)
Apply the grease on the Waterproof boot (See Figure 8), and make sure the 2
nd
coil block is securely inserted
into the Driving block (See Figure 9) and install the Driving block into the Main body housing. (See Figure 7)
In this occasion, be careful not to place the A of the 2
nd
coil block.
Click on the first or last page to see other EW1035-E2 service manuals if exist.