Read Panasonic UF-6300 / UF-6200 / UF-5300 Service Manual online
117
4.6.5.
Reception Problems
4.6.6.
Polling Problems
Note:
No-check Mode means that password is not set.
START
END
Yes
No
Does the machine answer
the Ringing signal?
the Ringing signal?
1. Set "RCV = AUTO"
2. Check that all covers are closed firmly.
3. Check the telephone line connection.
4. Check the Ringer Timing, or DRD setting.
5. Check the recording paper path.
6. Check CN18 (SC PCB), and CN28, and
29 (MJR PCB).
7. Replace the MJR PCB.
8. Replace the SC PCB.
2. Check that all covers are closed firmly.
3. Check the telephone line connection.
4. Check the Ringer Timing, or DRD setting.
5. Check the recording paper path.
6. Check CN18 (SC PCB), and CN28, and
29 (MJR PCB).
7. Replace the MJR PCB.
8. Replace the SC PCB.
Is the received copy OK?
Any other problems?
Yes
No
Make a copy, and refer to Sect. 4.4.14.
Yes
No
See Sect. 4.3. (Troubleshooting with the
Information Codes).
Information Codes).
START
END
Yes
No
Is Polling reception OK?
1. Set the same polling password as the other party is
using.
2. Check the password of the remote unit.
using.
2. Check the password of the remote unit.
Is Polling transmission OK?
Any other problems?
Yes
No
1. Set the polling password, or no - check mode.*
2. Check the password of the remote unit.
2. Check the password of the remote unit.
Yes
No
See Sect. 4.3. (Troubleshooting using information codes).
Click on the first or last page to see other UF-6300 / UF-6200 / UF-5300 service manuals if exist.