SDM-S76F - Sony Monitor Service Manual (repair manual)

sdm-s76f service manual
Model
SDM-S76F
Pages
17
Size
873.5 KB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
sdm-s76f.pdf
Date

Read Sony SDM-S76F Service Manual online

 
 
SDM-S76F
: AEP
 
SDM-S96F
: AEP 
Service Manual 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TFT LCD COLOR COMPUTER DISPLAY
 
CONTENTS 
 
 
 
 
 
Page 
PRECAUTIONS  
 
 
SPECIFICATIONS   4 
 
TIMING CHART   
 
 
SIGNAL CONNECTOR PIN 
 
EDID data for SDM-S76F          7 
 
EDID data for SDM-S96F          8         
 
OPERATING INSTRUCTIONS 
 
SERVICE MODE   
 
10 
 
WIRING DIAGRAM   
 
11 
 
DISASSEMBLY PROCESS  12, 
13 
 
ADJUSTMENT  
 
14 
 
EXPLODED VIEW 
 
15 
 
SERIAL NUMBER LIST 
 
16 
 
REPLACEMENT PARTS LIST 
16, 17 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                                                          2                                           
SDM-S76F / SDM-S96F (E)        
 
PRECAUTION 
 
 
 
WARNING FOR THE SAFETY-RELATED COMPONENT. 
• There are some special components used in LCD 
monitor that are important for safety.   
These parts are marked on the schematic diagram 
and the replacement parts list. 
It is essential that these critical parts should be 
replaced with the manufacturer’s specified parts to 
prevent electric shock, fire or other hazard. 
 
 
 
• Do not modify original design without obtaining written 
permission from manufacturer or you will void the 
original parts and labor guarantee. 
 
 
• If you want to replace with the new backlight (CCFL) or 
inverter circuit, must disconnect the AC adapter 
because high voltage appears at inverter circuit about 
650Vrms. 
 
TAKE CARE DURING HANDLING THE LCD MODULE WITH 
BACKLIGHT UNIT. 
 
 
• Must mount the module using mounting holes arranged 
in four corners. 
• Handle with care wires or connectors of the inverter 
circuit. If the wires are pressed cause short and may 
burn or take fire. 
 
• Do not press on the panel, edge of the frame strongly 
or electric shock as this will result in damage to the 
screen. 
 
 
• Do not scratch or press on the panel with any sharp 
objects, such as pencil or pen as this may result in 
damage to the panel. 
 
• Protect the module from the ESD as it may damage 
the electronic circuit (C-MOS). 
 
• Make certain that treatment person’s bodies are 
grounded through wrist band. 
   
• Do not leave the module in high temperature and in 
areas of high humidity for a long time. 
 
Leakage Current Hot Check Circuit 
 
 
• The module not is exposed to the direct sunlight. 
 
 
 
• Avoid contact with water as it may a short circuit within 
the module. 
 
 
 
 
• If the surface of panel becomes dirty, please wipe it off 
with a soft material. (Cleaning with a dirty or rough 
cloth may damage the panel.)   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                                                          3                                           
SDM-S76F / SDM-S96F (E)        
 
SPECIFICATIONS 
 
1. LCD CHARACTERISTICS 
Type                              : TFT Color LCD Module 
Active Display Area    : 17 inch - SDM-S76F 
: 19 inch - SDM-S96F 
Pixel Pitch                    : 0.264 (H) x 0.264 (V) -SDM-S76F 
: 0.294 (H) x 0.294 (V) -SDM-S96F 
Size                : 358.5(W) x 296.5(H) x 17.5(D) 
- SDM-S76F 
: 396(W) x 324(H) x 17.5(D) 
- SDM-S96F 
Color Depth         : 16.2M colors - SDM-S76F 
: 16.2M colors - SDM-E96A/D 
Electrical Interface    : LVDS 
Surface Treatment    : Anti Glare, Hard-coating (3H) 
Operating Mode      : Normally White 
Backlight Unit        : Top/Bottom edge side 4-CCFL 
(Cold Cathode Fluorescent Lamp) 
 
 
2. OPTICAL CHARACTERISTICS 
2-1. Viewing Angle by Contrast Ratio 
> 10   
SDM-S76F 
Left : 70°(Typ)    Right : 70°(Typ) 
Top : 70°(Typ)    Bottom : 60°(Typ) 
SDM-S96F 
Left : 70°(Typ)    Right : 70°(Typ) 
Top : 75°(Typ)    Bottom : 60°(Typ) 
2-2. Luminance :   
300(Typ) - SDM-S76F 
 300(Typ) - SDM-S96F 
2-3. Contrast Ratio :   
500:1 (Typ) - SDM-S76F 
700:1 (Typ) - SDM-S96F 
 
 
3. SIGNAL (Refer to the Timing Chart) 
3-1. Sync Signal 
Type : Separate Sync, Composite Sync, 
SOG (Sync On Green), Digital 
3-2. Video Input Signal 
1) Type: R, G, B Analog 
2) Voltage Level: 0~0.71 V 
a) Color 0, 0: 0 Vp-p 
b) Color 7, 0: 0.467 Vp-p 
c) Color 15, 0: 0.714 Vp-p 
3) Input Impedance : 75
 
3-3. Operating Frequency 
                Analog                Digital 
Horizontal:   28 ~ 80kHz    28 ~ 64kHz 
Vertical:      56 ~ 75Hz       60Hz 
Dot Clock:    < 135MHz     < 108MHz 
 
 
4. Max. Resolution 
Analog : 1280 x 1024 / 75Hz 
Digital : 1280 x 1024 / 60Hz 
 
 
5. POWER SUPPLY 
5-1. Power: AC 100~240V, 50/60Hz,   
5-2. Power Consumption 
    SDM-S76F 
      Normal operation          < 38W 
      Active off (deep sleep) <    1W 
      Power off                        <    1W   
    SDM-S96F 
      Normal operation          < 44W 
      Active off (deep sleep) <    1W 
      Power off                        <    1W   
 
 
6. ENVIRONMENT 
6-1. Operating Temperature: 
 5°C~35°C (41°F~95°F) 
6-2. Relative Humidity:   
10%~80% (Non-condensing) 
 
 
7. DIMENSIONS   
SDM-S76F 
Width: 369 mm (14.5'') 
Depth: 253 mm (10.0'') 
Height: 393.5-503.5 mm (15.5”-19.8'') 
SDM-S96F 
Width: 414 mm (16.3'') 
Depth: 277.5 mm (10.9'') 
Height: 409.5-519.5 mm (16.1-20.5”) 
 
 
8. WEIGHT   
SDM-S76F   
Net. Weight: 7 kg (15.4 lbs) 
Gross Weight: 9 kg (19.8 lbs) 
SDM-S96F  
Net. Weight : 7.5kg (16.5 lbs) 
Gross Weight: 10kg (22.0 lbs) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                                                          4                                           
SDM-S76F / SDM-S96F (E)        
 
Page of 17
Display

Download Sony SDM-S76F Service Manual (Repair Manual)

Here you can read online and download Sony SDM-S76F Service Manual in PDF. SDM-S76F service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony SDM-S76F Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.