Read Panasonic WV-NP472E Service Manual online
– 3 –
8
Referring to Fig. 2-6, disconnect the connector CN2 on
the Main Board and remove the Flexible Flat Cable.
the Main Board and remove the Flexible Flat Cable.
8
Remove two screws that secure the Front Shield Plate
and remove the Front Shield Plate from the Front Unit.
and remove the Front Shield Plate from the Front Unit.
8
Disconnect the connectors CN1 and CN3 on the Main
Board, and remove the Flexible Flat Cable and the Wire
Ass'y of the Front Unit.
Board, and remove the Flexible Flat Cable and the Wire
Ass'y of the Front Unit.
8
Remove two screws that secure the Main Board and
remove the Main Board from the Front Shield Plate.
remove the Main Board from the Front Shield Plate.
Fig. 2-4
Fig. 2-5
8
Referring to Fig. 2-5, disconnect the connector CN400 on
the I/F Power Board and remove the Flexible Flat Cable
of the Front Unit.
the I/F Power Board and remove the Flexible Flat Cable
of the Front Unit.
8
Remove two screws that secure the Front Unit and
remove the Front Unit from the Main Chassis.
remove the Front Unit from the Main Chassis.
8
Referring to Fig. 2-4, remove the Rear Escutcheon while
releasing the four hooks of the Rear Escutcheon from the
Main Chassis.
releasing the four hooks of the Rear Escutcheon from the
Main Chassis.
8
Remove one screw that secure the Rear Panel and
remove the Rear Panel from the Main Chassis.
remove the Rear Panel from the Main Chassis.
Main Chassis
Front Unit
Remove one screw.
Hooks
Rear
Escutcheon
Escutcheon
I/F Power Board
CN400
Remove two
screws.
screws.
Rear Panel
Main Chassis
Flexible
Flat
Cable
Flat
Cable
8
Reconnect the Flexible Flat Cable and the Wire Ass'y of
the Front Unit to CN1 and CN3 on the Main Board.
the Front Unit to CN1 and CN3 on the Main Board.
8
Reconnect the connectors by using the Extension Cable
(Refer to Fig. 1-2), between CN2 on the Main Board and
CN400 on the I/F Power Board for Adjustment.
(Refer to Fig. 1-2), between CN2 on the Main Board and
CN400 on the I/F Power Board for Adjustment.
8
Referring to Fig. 2-7, disconnect the connector CN300 on
the Network Sub Board and remove the Wire Ass'y of the
I/F Power Board.
the Network Sub Board and remove the Wire Ass'y of the
I/F Power Board.
8
Remove three screws that secure the I/F Power Board
from the Main Chassis.
from the Main Chassis.
8
Disconnect the connector CN401 on the I/F Power Board
and remove the Flexible Flat Cable of the Network Sub
Board(CN301), and remove the I/F Power Board.
and remove the Flexible Flat Cable of the Network Sub
Board(CN301), and remove the I/F Power Board.
Fig. 2-6
Front Unit
Flexible Flat
Cable
Cable
CN1
Remove
two
screws.
two
screws.
Main Board
Remove two
screws.
screws.
CN2
Front Shield Plate
Flexible Flat Cable
CN3
Wire Ass'y
8
Referring to Fig. 2-3, remove two screws that secure the
Upper Cover and remove the Upper Cover.
Upper Cover and remove the Upper Cover.
Fig. 2-3
Remove two screws.
Upper Cover
Main Chassis
I/F Power
Board
Board
CN401
Remove three screws.
Fig. 2-7
Wire Ass'y
CN300
Network Sub Board
(CN301)
Flexible Flat Cable
Click on the first or last page to see other WV-NP472E service manuals if exist.