Read Panasonic WV-NP472E Service Manual online
– 1 –
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Slide the panel to the left until it locks.
t
i
y
o
u
q
w
e
r
WV –
NP472
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
A
B
VIDEO OUT
RCV
LINK
10BASE-T/
100BASE-TX
100BASE-TX
DC 12V
IN
POWER
!3
!4
!2
!1
!0
q
Auto Iris Lens Connector
Connects the auto iris lens with a 4-pin male connector
supplied as a standard accessory (Part No. YWM1943A).
supplied as a standard accessory (Part No. YWM1943A).
w
Flange-back Adjusting Ring & Screw
Adjusts the back focal length and picture focus.
e
Lens (Option)
r
Camera Mounting Adapter
Mounts the camera onto a mounting bracket.
t
Down Button (
)
Moves the cursor downward and selects items in the CAM
SET UP menu.
SET UP menu.
y
Left Button (
)
Moves the cursor leftward, selects the mode and adjusts
some levels.
some levels.
u
Up Button (
)
Moves the cursor upward and selects items in the CAM
SET UP menu.
SET UP menu.
i
Right Button (
)
Moves the cursor rightward, selects the mode and adjusts
some levels.
some levels.
o
Set Button (
)
Activates an item selected in the CAM SET UP menu.
!0
Network Port with Indicators (10BASE-T/100BASE-
TX/RCV/LINK)
TX/RCV/LINK)
Connect to a PC or a network via a hub with a 10BASE-
T/100BASE-TX cable attached RJ-45 connector. Indicators
will light up while receiving data (RCV) or establishing com-
munications (LINK).
T/100BASE-TX cable attached RJ-45 connector. Indicators
will light up while receiving data (RCV) or establishing com-
munications (LINK).
!1
Control Terminals
Connect respective devices.
ALARM IN: Alarm sensor, ALARM OUT: Recording
device/alarm indicator, AUX OUT: External device,
DAY/NIGHT IN: Optical sensor, GND: Signal ground
ALARM IN: Alarm sensor, ALARM OUT: Recording
device/alarm indicator, AUX OUT: External device,
DAY/NIGHT IN: Optical sensor, GND: Signal ground
!2
Reset Button (A, B)
The button A, along with the
and
buttons, resets
the network setup parameters when you hold down these
buttons for 6 seconds in the power-on state.
The button B resets the HTML files and alarm mail setup in
the same manner as the button A.
buttons for 6 seconds in the power-on state.
The button B resets the HTML files and alarm mail setup in
the same manner as the button A.
Note:
Never press both the reset buttons A and B at a time.
!3
Video Output Connector (VIDEO OUT)
Supplies analog video signal (composite) to the connected
device.
device.
!4
Power In Terminal and Power Indicator
(DC 12V IN, POWER)
(DC 12V IN, POWER)
Connect to a DC power supply using proper cables. The
power indicator lights up when power is supplied.
power indicator lights up when power is supplied.
Click on the first or last page to see other WV-NP472E service manuals if exist.