Read Panasonic WV-CU950 Service Manual online
2-2
14. Turn and keep the Joystick to fully left side.
The LCD on the Front Panel will indicate as right.
15. Press the [CAM(SET)] key while turning the Joystick to
left side.
The LCD on the Front Panel will indicate as right.
The LCD on the Front Panel will indicate as right.
16. Return the Joystick to center.
The LCD on the Front Panel will indicate as right.
Note : It needs your hand to release with flipping.
Note : It needs your hand to release with flipping.
17. Press the [CAM(SET)] key.
The LCD on the Front Panel will indicate as right,
18. Confirm the following.
• The LCD on the Front Panel will indicate 64 steps of
each change, when it turns to the upper and lower sides
and right.
and right.
• The value of Pan and Tilt on the LCD will return to
ZERO, when the Joystick is returned to the center.
19. Turn off the power to finish the calibration.
2. Zoom Wheel Calibration
3
The Zoom Wheel Calibration is required in the
following cases
following cases
• In case of replacing the Joystick Unit.
• In case of disassembling the Joystick Unit.
• In case of replacing the Main Board.
• In case of replacing the EEPROM (IC6 on the Main
• In case of disassembling the Joystick Unit.
• In case of replacing the Main Board.
• In case of replacing the EEPROM (IC6 on the Main
Board).
• In case that calibrated data has been changed by oper-
ation mistake.
3
Procedure
1. Turn off the power.
2. To execute the Pan / Tilt Calibration Mode, Turn on the
2. To execute the Pan / Tilt Calibration Mode, Turn on the
power while pressing the [8] and [MON(ESC)] keys
simultaneously.
The LCD on the Front Panel will indicate as right.
simultaneously.
The LCD on the Front Panel will indicate as right.
3. Enter the administrator password.
Notes: • The factory default is "650".
• To delete a character, press the CLEAR button.
Note: Just example, It depends on Unit.
4. Press the [CAM(SET)] key.
The LCD on the Front Panel will indicate as right.
5. Press the [CAM(SET)] key for the starting adjustment.
The LCD on the Front Panel will indicate as right.
6. Turn and keep the Zoom Wheel to fully right (TELE)
side.
The LCD on the Front Panel will indicate as right.
The LCD on the Front Panel will indicate as right.
U : F 1 D : 0 8 T C : 7 0
R : F 0 L : _ _ P C : _ _ 0 7
U : F 1 D : 0 8 T C : 7 0
R : F 0 L : 0 7 P C : _ _ 0 7
U : F 1 D : 0 8 T C : 7 0
R : F 0 L : 0 7 P C : _ _ 7 6
U : F 1 D : 0 8 T C : 7 0 0
R : F 0 L : 0 7 P C : 7 6 0
U : F 1 D : 0 8 T C : 7 0 0
R : F 0 L : 0 7 P C : 7 6 0
Z o o m C a l i b r a t i o n
A d m i n P a s s w o r d _ _ _ _ _
T : B C W : 4 5 Z C : 7 D 0
T : _ _ W : _ _ Z C : _ _ 8 4
T : _ _ W : _ _ Z C : _ _ B D
Click on the first or last page to see other WV-CU950 service manuals if exist.