Read Panasonic WV-CU950 Service Manual online
1-3
to the next record. When there is no newer record,
normal playback will be continued. (Skip)
normal playback will be continued. (Skip)
• When rotated to the left, playback will be skipped to
the previous record. When there is no former
record, normal playback will be continued. (Skip)
record, normal playback will be continued. (Skip)
• Selects a parameter setting or a character on setup
menus.
• Moves to the next or previous sub item on the func-
tion list.
@8
Shuttle hold button (SHUTTLE HOLD)
• If you press this button while rotating the shuttle ring,
playback speed will be maintained even after removing
a hand from the shuttle ring. (The LED indicator on this
button blinks during the fast playback.)
a hand from the shuttle ring. (The LED indicator on this
button blinks during the fast playback.)
Note:
This operation differs from “Hold playback
speed” performed by holding the shuttle ring of
recorder. When you hold the playback speed from
the system controller, the EL-ZOOM, MULTI-
SCREEN, and OSD buttons are unavailable.
recorder. When you hold the playback speed from
the system controller, the EL-ZOOM, MULTI-
SCREEN, and OSD buttons are unavailable.
• If you press this button again, normal playback speed is
recovered.
@9
History button (HISTORY)
When you press the + or – button while holding down
this button, camera images selected in the past are dis-
played in order or in reverse order.
this button, camera images selected in the past are dis-
played in order or in reverse order.
#0
– button [–]
This button is pressed when selecting a camera with
the lower channel number. During setup, this button is
pressed to decrease the value of selected parameter.
the lower channel number. During setup, this button is
pressed to decrease the value of selected parameter.
#1
+ button [+]
This button is pressed when selecting a camera with
the higher channel number. During setup, this button is
pressed to increase the value of selected parameter.
the higher channel number. During setup, this button is
pressed to increase the value of selected parameter.
#2
Recorder/Unit Selection button (RECORDER/UNIT)
• Selects a recorder.
• When you press while holding down the SHIFT button,
• When you press while holding down the SHIFT button,
this button selects a system unit.
#3
Preset/Program preset button (PRESET/PGM
PRESET)
PRESET)
• Recalls a preset position or the home position of combi-
nation camera.
• When you press while holding down the SHIFT button,
this button programs preset positions.
#4
Camera position button (CAM POSI)
This button is pressed to select the camera position (the
combination of camera number and preset position).
combination of camera number and preset position).
#5
Numeric buttons (0, 1 to 9)
Enters camera numbers, monitor numbers, or unit num-
bers, etc.
bers, etc.
#6
Monitor/Escape button (MON (ESC))
• Selects a monitor.
• When pressed during setup, this button determines the
• When pressed during setup, this button determines the
current selection to return to the main menu.
#7
Camera/Set button (CAM (SET))
• Selects a camera.
• When pressed during setup, this button selects an item
• When pressed during setup, this button selects an item
to go to a submenu.
#8
LCD (Liquid Crystal Display)
Displays the numbers of unit, monitor and camera cur-
rently selected. The LCD also displays the functions
assigned to F1 to F8 buttons.
rently selected. The LCD also displays the functions
assigned to F1 to F8 buttons.
#9
Adjustment button (ADJUST)
This button is pressed to perform the settings of LCD
brightness, LCD contrast, alarm buzzer, or button
buzzer.
brightness, LCD contrast, alarm buzzer, or button
buzzer.
$0
Menu button (MENU)
• Displays the list of menu functions on the LCD.
• Menu functions are assignable to the function buttons
• Menu functions are assignable to the function buttons
(F1 to F4/F5 to F8) or joystick function buttons (A, B,
and top buttons).
and top buttons).
Note:
This function is available only in the PS·Data
mode.
$1
Function buttons (F1 to F4/F5 to F8)
• In the PS·Data mode, this button recalls functions you
have assigned.
• In the PS·Data mode, when you press while holding
down the SHIFT button, the F1 to F4 buttons become F5
to F8.
to F8.
• In the terminal mode, this button activates a function
displayed on the LCD.
$2
Exit button (EXIT)
While a menu function, determined with the ENTER but-
ton, is being displayed on the LCD, this button is
pressed to return to the upper menu.
ton, is being displayed on the LCD, this button is
pressed to return to the upper menu.
$3
Enter button (ENTER)
While menu functions are displayed on the LCD, this
button determines the menu selection, and displays the
submenu on the LCD.
button determines the menu selection, and displays the
submenu on the LCD.
$4
Feet
When extending these feet, you can raise the front side
by approx. 1 cm {0.39 in.}.
by approx. 1 cm {0.39 in.}.
Click on the first or last page to see other WV-CU950 service manuals if exist.