Read Panasonic WV-CS850B / WV-CS854BE Service Manual online
3. Connection and Setting up for
Adjustment
3.1. Connection
8
Fig. 3-1-1 shows the connecting diagram for the
adjustment of the WV-CS850B/CS854BE.
Fig. 3-1-1
8
Connect the Underscanned Colour Video Monitor to the
Video Output Connector of the E.V.R. Adjustment Kit
through the Vectorscope using the coaxial cables.
8
Connect the Video Output Cable of the WV-
CS850B/CS854BE to the CAMERA INPUT Connector of
the E.V.R. Adjustment Kit by the coaxial cable.
8
Terminate the input terminal of the Underscanned Colour
Video Monitor with 75Ω.
8
Connect the 24V AC Power Supply Unit to the WV-
CS854B or connect the 220-240 V AC Power Supply Unit
to the WV-CS850B.
8
Connect the +12 V DC Power Supply Unit to the E.V.R.
Adjustment Kit.
8
Connect the E.V.R. Adjustment Kit to IBM PC/AT type
using the Standard Straight RS-232C cable.
8
Connect the probe of the Digital Voltmeter, Oscilloscope
or Frequency Counter at the desired Test Point in each
adjustment step.
WV-CS850B
WV-CS854BE
WV-CS854BE
CAMERA
E.V.R.
Adjustment Kit
Adjustment Kit
Personal Computer
Standard
RS-232C
RS-232C
24V AC
Power Supply
(for WV-CS854BE)
Power Supply
(for WV-CS854BE)
220 - 240 V AC (for WV-CS850B)
Floppy Disk
75Ω
Vectorscope
Underscanned
Colour Video Monitor
Colour Video Monitor
+12V DC
Power Supply
Power Supply
3.2. Setting Up for the Remote E.V.R
Adjustment Kit
< Remote E.V.R Adjustment Kit >
8
Fig. 3-2-1 shows the Remote E.V.R. Adjustment Kit.
Fig. 3-2-1
< Switch Setting >
8
Referring to Fig. 3-2-2, remove four screws that secure
the Upper Cover and remove the Upper Cover.
Fig. 3-2-2
8
Set the switch SW3 on the board to the position as shown
in Fig. 3-2-3.
Fig. 3-2-3
8
Set the VP/STD CAMERA selection switch on the rear
panel to STD CAMERA position.
<Rear>
<Fr
ont>
Board
SW3
ON
<SW3>
1
2
3
4
Select switch #2 to
ON position.
ON position.
Remove four screws.
Upper Cover
REMOTE
OPERATE
PROG
ALARM
RESET
RESET
NORMAL
SYSTEM
ALARM OFF
EVR
Left
Switch
Right
Switch
Mode Selection
Switch
Program
Switch
Up
Switch
Down
Switch
Set
Switch
IN
OUT
STD. CAMERA
VP CAMERA
VIDEO
CAMERA
DC12V IN
RS232C
VP/STD Camera Selection Switch
RS232C Connector
REMOTE
OPERATE
PROG
ALARM
RESET
RESET
NORMAL
SYSTEM
ALARM OFF
EVR
– 2-8 –
Click on the first or last page to see other WV-CS850B / WV-CS854BE service manuals if exist.