Read Panasonic WV-CS850B / WV-CS854BE Service Manual online
O Referring to Fig. 2-1-9, remove four screws that secure
the Main Board and remove the Main Board and
disconnect one connector.
Fig. 2-1-9
2.2. Slip Ring Replacement Procedure
8
After disassembling the camera according to the "2.1
Disassembling Procedure for the Camera Head" Q -
T, carry out the following procedure.
Q Referring to Fig. 2-2-1, remove five screws and one
connector that secure the Camera Head Unit, and
remove the Camera Head Unit by pulling it up.
Fig. 2-2-1
Y Referring to Fig. 2-1-6, remove two screws that secure
the Lens Cover and remove the Lens Cover .
Fig. 2-1-6
U Referring to Fig. 2-1-7, remove one screw that secure the
Tilt Board.
Fig. 2-1-7
I Referring to Fig. 2-1-8, remove three screws that secure
the Camera Unit and remove the Camera Unit.
Fig. 2-1-8
Remove one screw.
Tilt Board
Remove
two screws.
two screws.
Lens Cover
Remove one connector.
Slip Ring
Remove five screws.
Camera Head Unit
Remove
three screws.
three screws.
Camera Unit
Remove two screws.
Main Board
Remove two screws
Disconnect
one connector.
one connector.
– 2-4 –
Click on the first or last page to see other WV-CS850B / WV-CS854BE service manuals if exist.