Read Panasonic WJ-NT104 Service Manual online
– 9 –
2.4. PC Setup
The factory default settings of the WJ-NT104 are as
follows:
follows:
IP address
Subnet Mask
Default gateway
192.168.0.10
255.255.255.0
192.168.0.1
For a client PC to access WJ-NT104 factory default
settings, set the IP address of the PC to
192.168.0.XX (XX means any number from 2 to 254
except 10).
settings, set the IP address of the PC to
192.168.0.XX (XX means any number from 2 to 254
except 10).
q
Connect the WJ-NT104 to the PC.
w
Change the PC’s TCP/IP to match the factory
default settings of the WJ-NT104.
default settings of the WJ-NT104.
If your PC's OS is Windows95 or Windows98,
proceed as follows:
proceed as follows:
(1) Click the Start button, point to settings, and
then click Control Panel.
(2) Double-click Network.
(3) In the Network
dialog box, click the
Configuration tab.
(4) Choose TCP/IP, and then click the
[Properties] button to display the TCP/IP
Properties dialog box.
Properties dialog box.
(5) Specify an IP address as follows:
IP Address:
192.168.0.9
Subnet Mask: 255.255.255.0
e
Restart the PC.
Start the WWW browser, and select [Do not use
proxy for address 192.168.0.10].
Start the WWW browser, and select [Do not use
proxy for address 192.168.0.10].
From page 7
To page 11
Table 9
Table 10
Click on the first or last page to see other WJ-NT104 service manuals if exist.