Read Panasonic WJ-NT104 Service Manual online
No Display
8
In case there is no display as shown in Table
17, check the [Do not use proxy for address
192.168.0.10] of the browser.
17, check the [Do not use proxy for address
192.168.0.10] of the browser.
8
If it is correct, check the Video signal circuit
of the Main Board.
of the Main Board.
No Live Image
8
In case the Live Image is not displayed as
shown in Table 18, check the connection of
the Camera Cable and Channel Settings.
the Camera Cable and Channel Settings.
8
If it is correct, check the Video signal circuit of
the Main Board.
No Reply
8
Confirm that the DC voltage of the each point
obtain its reference voltage as follows.
(1) Pin 1 of the IC304 on the Main Board is +9.0V.
(2) Pin 1 of the IC303 on the Main Board is +5.0V
obtain its reference voltage as follows.
(1) Pin 1 of the IC304 on the Main Board is +9.0V.
(2) Pin 1 of the IC303 on the Main Board is +5.0V
for Digital Circuit.
(3) Pin 2 of the IC304 on the Main Board is +5.0V
for Analog Circuit.
(4) Pin 2 of the IC303 on the Main Board is +3.3V.
8
If these voltages are not correct, check the DC
Power of the WJ-NT104.
Power of the WJ-NT104.
– 12 –
From page 11
Table 17
Table 18
No Live image
Click on the first or last page to see other WJ-NT104 service manuals if exist.