Read Panasonic WJ-NT104 Service Manual online
– 7 –
■
Check for the WJ-NT104
PC (browser)
Ethernet crossover cable
WJ-NT104
Camera (max. 4)
PC (browser)
Hub
Ethernet
straight cable
straight cable
Ethernet
straight cable
straight cable
WJ-NT104
Camera (max. 4)
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
1. Connection
The figure below shows how the WJ-NT104 can be
connected directly to a PC for testing before it is con-
nected directly to a network. The connection can also
be made via a hub.
connected directly to a PC for testing before it is con-
nected directly to a network. The connection can also
be made via a hub.
●
Direct Connection to a PC without Hub
Connect the 10Base-T port on the PC to the Ethernet
port on the WJ-NT104 with a crossover cable.
port on the WJ-NT104 with a crossover cable.
●
Connection to a Client PC via Hub
Connect the 10Base-T port on the PC to the Ethernet
port on the WJ-NT104 with straight cables via a hub.
port on the WJ-NT104 with straight cables via a hub.
Fig. 1
Fig. 2
2. Check Procedure
2.1. Power Supply
8
Confirm that the Operate Indicator on the Front
Panel is lit.
Panel is lit.
2.2. Backup of the Data
8
Refer to page 4, Backup of the Data.
2.3. Initialize
8
Initialize the WJ-NT104.
NOTE) When the WJ-NT104 is initialized, the
Backup Data is returned to the factory
default settings.
default settings.
(1) Referring to Fig. 3, remove one screw that secure
the Front Panel and remove the Front Panel.
(2) Referring to Fig. 3, remove eight screws that
secure the Upper Cover and remove the Upper
Cover in the direction of the arrow.
Cover in the direction of the arrow.
(3) Set the 1 and 2 of the Mode Selector to ON
position and 3 to 10 of the Mode Selector to OFF
position as shown in Fig. 4.
position as shown in Fig. 4.
To page 9
ON
OFF
1 2 3 4
7 8 9 10
5 6
Mode Selector (MODE)
Fig. 4
Fig. 3
Upper Cover
Remove two screws
Remove four screws
Remove two screws
Remove one screw
Front Panel
Click on the first or last page to see other WJ-NT104 service manuals if exist.