BM-ET300, BM-ET300E - Panasonic Video Monitoring Service Manual (repair manual). Page 5

– 1-1 –

■ External  View

8 Front  View

REJECT

ACCEPT

BM-ET300

u

!0

o
i

t

r 

y 

e

q

w

!1

Q

Mirror
This mirror is used for eye positioning at the time of iris
data enrollment/recognition. View the mirror from the
front side where you can position both eyes in the mirror.

W

Guide indicator
When a user comes within 50 cm {1.64 ft.} of the front of
an iris camera, this indicator will appear in the mirror for
guidance. Adjust your eye position by following the guide
indicator or voice guidance from the speaker.

E

Eye image capturing cameras and a near-infrared light
are located behind this panel. Depending on the user,
the near-infrared light (blinking red light) can be seen. 
Notes:

• Avoid covering the front panel with a hand or cloth,

etc. That may cause invalid recognition.

• Avoid pinching objects between the front panel and

the main unit. That may cause a malfunction.

R

These cameras, which are located behind the front
panel, are used for eye image capturing.
Note: Avoid covering these cameras with a hand or

cloth, etc. Or avoid placing smudges on these cam-
eras. It may cause invalid recognition.

T

Result indicators
These indicators inform you of recognition results.
ACCEPT: This indicator lights up when recognition is

successfully completed.

REJECT: This indicator lights up when recognition is not

successfully completed or the user's iris data is not
enrolled in the iris camera.

Y

This colour camera, which is located behind the front
cover, is used for facial monitoring. If you connect this
camera to external equipment such as a digital disk
recorder, you can record user's face and surroundings to
check the capturing condition.

U 

Live indicator
This indicator is blinking during standby. The blinking
speeds up when a user stands where he/she can see
both eyes in the mirror and guidance starts. The indica-
tor can be set to be continuously on or off. Refer to sys-
tem administrators for details on the settings.

I

Speaker
This speaker outputs voice guidance that guides a
user’s position and gives the recognition result. The
voice guidance can be set to any of the following. Refer
to system administrators for details on the settings.
Mute: Voice guidance is not output.
Simple: Shutter sound and recognition result are output.

Voice guidance is not output.

Full: Voice guidance, shutter sound, and recognition

result are output.

O

Audio volume controller
This controller adjusts the audio level of voice guidance.
For adjustment, use a Phillips screwdriver that is 3 mm
in diameter and more than 25 mm long. It is recom-
mended to use a non-conductive driver.
Note: Avoid adding excessive force to the screwdriver.

That may damage the audio volume controller.

P

Tilt handles
You can adjust the angle of the front panel by holding
these handles. Adjust the handles so as to position both
eyes at the centre of the mirror.

{

Front cover
This cover is removed at the time of installation, connec-
tion or maintenance. Users should not open it. (Refer to
service personnel when the front cover needs to be
opened.)