Read Panasonic BM-ED500 Service Manual online
1-3
●
Terminal Board
q
Gate Control I/F Connectors
An electric lock is connectable to GATE 1 connector.
Wiegand / RS-485 Interface is connectable to GATE 2
connector.
Wiegand / RS-485 Interface is connectable to GATE 2
connector.
Note:
When using Wiegand/RS-485 interface, refer to
UL Listed access control panel’s installation instruc-
tions for compatibility information with iris camera
model BM-ET500E and control unit model BM-
ED500.
tions for compatibility information with iris camera
model BM-ET500E and control unit model BM-
ED500.
w
Alarm Input/Output Connectors
(ALARM IN, ALARM OUT)
ALARM IN:
(ALARM IN, ALARM OUT)
ALARM IN:
These are connectors are not used.
ALARM OUT:
These are connectors to output the alarm
signal from the control unit to the external devices.
Alarm-related parameters are configurable through
the administration PC. (Refer to the administrator’s
guide of the administration software.)
Alarm-related parameters are configurable through
the administration PC. (Refer to the administrator’s
guide of the administration software.)
e
Iris Camera Connectors (CAMERA 1 to 3)
These are connectors for communication between iris
cameras and the control unit. Up to 3 iris cameras are
connectable (x 2 for recognition cameras and x 1 for an
enrollment camera).
cameras and the control unit. Up to 3 iris cameras are
connectable (x 2 for recognition cameras and x 1 for an
enrollment camera).
r
LAN Connector Port (10BASE-T/100BASE-TX)
This is a port to connect the control unit to LAN (Local
Area Network).
Area Network).
Note:
Route all power limited wiring away from non-
power limited wiring.
●
Power Board
q
Camera Power Connectors (Power-limited terminal)
These are connectors to supply iris cameras with 32 V
DC power. One connector can supply power to one
camera.
DC power. One connector can supply power to one
camera.
Note:
Power supply from one connector to more than
one camera may cause trouble.
w
Power Input Connectors (Power-limited terminal)
Route away from all other power limited wires.
e
Power Switch
Turns on/off the power of the control unit. When pressed,
the power is on.
When the power is turned on, the power indicator lights
up and 32 V DC power is supplied from the camera
power connectors to iris cameras.
the power is on.
When the power is turned on, the power indicator lights
up and 32 V DC power is supplied from the camera
power connectors to iris cameras.
Note:
Do not turn off the power during setting/initializa-
tion.
GATE 1
CN903
CN901
CN906
CN905
CN904
10BASE-T/
100BASE-TX
100BASE-TX
GATE 2
ALARM IN
CAMERA 3
CAMERA 2
CAMERA 1
ALARM OUT
G
8
G
7
G
6
G
5
G
4
9
E901
8
7
6
5
4
3
2
1
G
3
G
2
G
1
E902
q
w
e
r
IC11
IC13
D21
E2
E1
SW1
CN1
L1
L2
C7
C8
C55
D1
AC-IN
Q1
C56
T1
C35
C40
C41
C47
CN2
CN4
CN3
F1
T6,3AL 250V
IC12
C34
C32
C31
L25
L29
L23
+32V
–
–
DC-OUT
+32V
E4
E5
E10
E10
q
w
e
Click on the first or last page to see other BM-ED500 service manuals if exist.