Read Panasonic CW-C241SE Service Manual online
CW-C241SE
– 6 –
°
C
HOW TO OPERATE
4
.Thermostat Control Knob
Set the Thermostat Control Knob at the
desired setting. (Usually “
desired setting. (Usually “
~
” is a
recommended setting position.) If the room
temperature is unsatisfactory after a reasonable
amount of time, turn the control knob clockwise
to cool the room more, or anticlockwise to cool
the room less.
temperature is unsatisfactory after a reasonable
amount of time, turn the control knob clockwise
to cool the room more, or anticlockwise to cool
the room less.
• When the Thermostat Control Knob is set
to “
to “
”, moisture may freeze onto the coils
and prevent effective cooling. If this happens,
turn the knob to “
turn the knob to “
” HIGH FAN, and the
thermostat control knob anticlockwise. This will
quickly defrost the cooling coil so that normal
cooling can be resumed.
quickly defrost the cooling coil so that normal
cooling can be resumed.
5
.Air Swing Switch
(Airflow direction adjustment
Side-to-Side)
Side-to-Side)
For fixed side-to-side air direction, set the
Air Swing Switch to “ ” ON until the desired
air direction is obtained, then move it to “ ”
OFF.
For continuous side-to-side air circulation, set
the Air Swing Switch to “
Air Swing Switch to “ ” ON until the desired
air direction is obtained, then move it to “ ”
OFF.
For continuous side-to-side air circulation, set
the Air Swing Switch to “
” ON and leave
it there.
2
. Open the
cover
1
.Power Supply
Set the Main Control Knob to the “
” OFF
position; confirm that the power supply cord is
connected to a proper AC outlet.
connected to a proper AC outlet.
Recommended
Use the air conditioner under
the following conditions:
the following conditions:
• Operating temperature range.
(unit in °C)
Indoor unit
Outdoor unit
D.B.T. W.B.T. D.B.T. W.B.T.
Maximum
Temperature
Minimum
Temperature
Temperature
Minimum
Temperature
D.B.T.: Dry Bulb Temperature
W.B.T.: Wet Bulb Temperature
• Humidity does not exceed 90%.
Continuous operation at over 90% humidity
may create condensation and waterdrops on
the intake and outlet vents.
may create condensation and waterdrops on
the intake and outlet vents.
32
23
43
26
21
15
21
15
3
.Main Control Knob
Set to either “
” LOW COOL or “
” HIGH
COOL as required.
(FAN setting operates the fan only.)
* Caution: If the Main Control Knob is turned off
(FAN setting operates the fan only.)
* Caution: If the Main Control Knob is turned off
or changed to a fan setting from a cooling
operation setting, WAIT at least 3 minutes
before resetting to a cooling operation.
operation setting, WAIT at least 3 minutes
before resetting to a cooling operation.
Click on the first or last page to see other CW-C241SE service manuals if exist.