CW-C241SE - Panasonic Air Conditioner Service Manual (repair manual). Page 5

– 4 –

•

The air conditioner should be installed in a dry place where there are no draughts.

•

Condensation from the air conditioner must be drained to an appropriate location.

•

Do not install in a location where flammable gas leaks are possibility.

•

Using in locations where the air is salty such as beside the sea or near hot spas, or
where sulphurous gas is generated, may lead to a malfunction. Please consult your dealer.

•

Ensure that the wall is strong enough to support the unit.

•

There should not be any obstacles surrounding the unit.

•

Prepare the installation hole slightly bigger than cabinet size.

1) PREPARE CHASSIS

• Remove chassis locking bracket by loosening the screw.
• Slide the chassis out from the cabinet.

2) Place cabinet into opening and secure it by wood screws or nails.

• The cabinet should be installed tilted slightly lower to the rear

for necessary condensate drainage. (Max. 10mm).

3) Slide Chassis into the cabinet which installed the above 2).

• The tubings or ducting part should not touch the cabinet.

4) Lock the chassis into cabinet by chassis locking bracket.
5) Place FRONT GRILLE onto CABINET by screws.

• To place the grille, hook top of grille onto top of cabinet, push bottom of grille

in until it snaps into place. Secure the Front Grille with the screws at the right,
left and centre of the grille.

(wall)

Outdoor

Front Grille

Over
15cm

Over
15 cm

Fence or
likewise

Ceiling

66 cm

Less than

24 cm

Indoor

(wall) Outdoor

Over

15cm

Fence or
likewise

Over

15cm

Over 50cm

Grille

Cabinet

To place the Grille

Over
50 cm

42.8 cm

Indoor