CW-C180BG, CW-C241SG, CW-A180BG - Panasonic Air Conditioner Service Manual (repair manual). Page 7

– 6 –

Over
15 cm

Over
15 cm

66 cm

42.8 cm

Front Grille

Outdoor

(wall)

Over
50 cm

Fence or 
likewise

Indoor

Ceiling

Outdoor

Over
15 cm

Over 50 cm

Over
15 cm

Indoor

(wall)

Fence or
likewise

Less than
22 cm (CW-C180BG & 
CW-A180BG),
28 cm (CW-C241SG)

• The air conditioner should be installed in a dry place where there are no draughts.
• Condensation from the air conditioner must be drained to an appropriate location.
• Do not install in a location where flammable gas leaks are a possibility.
• Using in locations where the air is salty such as beside the sea or near hot spas, or

where sulphurous gas is generated, may lead to a malfunction. Please consult your dealer.

• Select a installation location which is rigid and strong enough to support or hold the unit and select a

location for easy maintenance.

• There should not be any obstacles surrounding the unit.

• Prepare the installation hole slightly bigger than cabinet size.

1) PREPARE CHASSIS

• Remove chassis locking bracket by loosening the screw.
• Slide the chassis out from the cabinet.

2) Place cabinet into opening and secure it by wood screws or

nails.
• The cabinet should be installed tilted slightly lower to the

rear for necessary condensate drainage. (Max. 10mm).

3) Slide Chassis into the cabinet which installed the above 2.

• The tubings or ducting part should not touch the cabinet

4) Lock the chassis into cabinet by chassis locking bracket.

5) Place FRONT GRILLE onto CABINET by screws.

• To place the grille, hook top of grille onto top of cabinet, push

bottom of grille in until it snaps into place. Secure the Front Grille
with the screws at the right, left and center of the grille.

Grille

Cabinet

To place the Grille