CW-C180BG, CW-C241SG, CW-A180BG - Panasonic Air Conditioner Service Manual (repair manual). Page 10

– 9 –

1

Set the Main Control Knob to the OFF position;
confirm that the power supply cord is connected
to a proper AC outlet.

32

23

43

26

21

15

21

15

Recommended

Use the air conditioner under
the following conditions:

• Operating temperature range.

(unit in 

°

C)

Indoor unit

Outdoor unit

D.B.T. W.B.T. D.B.T. W.B.T.

Maximum
Temperature
Minimum
Temperature
Maximum
Temperature
Minimum
Temperature

D.B.T.: Dry Bulb Temperature

W.B.T.: Wet Bulb Temperature

• Humidity does not exceed 90%.

Continuous operation at over 90% humidity
may create condensation and waterdrops on
the intake and outlet vents.

  

27

–

21

15

20

–

-5

-6

2

3

Set to either Low COOL, High COOL, Low
HEAT or High HEAT as required.
(FAN setting operates the fan only.)

* Caution: If the Main Control Knob is turned

off or changed to a fan setting from a cooling
or heating operation setting, WAIT at least 3
minutes before resetting to a cooling or
heating operation.

4

Set the Thermostat Control Knob to the desired
setting. (Usually “4 ~5” is a recommended
setting for heating and “6 ~ 7” for cooling.) If the
room temperature is unsatisfactory after a
reasonable amount of time, turn the control
knob clockwise or anticlockwise to make the
room cooler or warmer.

• When the Thermostat Control Knob is set to
10, moisture may freeze onto the coils and
prevent effective cooling. If this happens, turn
the Main Control knob to Fan, and the thermo-
stat control knob anticlockwise. This will quickly
defrost the cooling coil so that normal cooling
can be resumed.

5

For fixed side-to-side air direction, set the Air

Swing Switch to ON until the desired air direction

is obtained, then move it to OFF.

For continuous side-to-side air circulation, set

the Air Swing Switch to ON and leave it there.