CW-C180BG, CW-C241SG, CW-A180BG - Panasonic Air Conditioner Service Manual (repair manual). Page 9

– 8 –

1

Set the Main Control Knob to the OFF position;
confirm that the power supply cord is connected
to a proper AC outlet.

Recommended

Use the air conditioner under
the following conditions:

• Operating temperature range.

(unit in 

°

C)

Indoor unit

Outdoor unit

D.B.T. W.B.T. D.B.T. W.B.T.

Maximum
Temperature
Minimum
Temperature

D.B.T.: Dry Bulb Temperature

W.B.T.: Wet Bulb Temperature

• Humidity does not exceed 90%.

Continuous operation at over 90% humidity
may create condensation and waterdrops on
the intake and outlet vents.

32

23

43

26

21

15

21

15

2

3

Set to either Low Cool or High Cool as required.
(FAN setting operates the fan only.)

* Caution: If the Main Control Knob is turned

off or changed to a fan setting from a cooling
operation setting, WAIT at least 3 minutes
before resetting to a cooling operation.

4

Set the Thermostat Control Knob at the
desired setting. (Usually “6 ~ 7” is a
recommended setting position.) If the room
temperature is unsatisfactory after a
reasonable amount of time, turn the control
knob clockwise to cool the room more, or
anticlockwise to cool the room less.

• When the Thermostat Control Knob is set to
10, moisture may freeze onto the coils and
prevent effective cooling. If this happens, turn
the Main Control knob to High Fan, and the
thermostat control knob anticlockwise. This will
quickly defrost the cooling coil so that normal
cooling can be resumed.

5

For fixed side-to-side air direction, set the Air
Swing Switch to ON until the desired air direction
is obtained, then move it to OFF.

For continuous side-to-side air circulation, set

the Air Swing Switch to ON and leave it there.