SW8D1 - LG Washing Machine Service Manual (repair manual). Page 11

-11-

After removing the back cover and V-belt, refer to the
figure and proceed as follows :

(1) Disconnect the lead wires of the wash motor.
(2) Lay the washing machine on its front side on a
     blanket or cardboard.
(3) Hold the wash motor, and remove the nuts. (fig.30)

After removing the spin dryer basket assembly, refer to
the figure and proceed as follows :

(1) Pull out the brake wire assembly from the brake

wire supporter and also take it out from the brake
assembly.

(2) Open the washing cover and unscrew the pulsator

fixing screw and remove the pulsator. (Normal)
(fig.32)

Fig.30

(4) Remove the special bolt assemblies and remove

the wash motor from the base.

(5) Pull out the damper lowers and damper washers.
(6) Loosen the socket bolt fastening the motor pulley

assembly and remove the motor pulley assembly
from the motor. (fig.31)

Fig.31

 To assemble the wash motor assembly to the base,

reverse the above disassembly procedure.

Fig.32

(3) Remove the V-belt. (fig. 33)

Fig.33

(4) Lay the washing machine on its front side on a

blanket or cardboard.

(5) Unscrew and remove the screws fastening the base

and remove the base assembly. (fig.34)

Fig.34

WP 830

29/8/04, 10:51 PM

11