Read LG SW8D1 Service Manual online
-6-
4.DISASSEMBLY INSTRUCUTIONS
Before attempting to replacement or adjust any part of
the machine, disconnect the electrical power cord from
the wall outlet.
the machine, disconnect the electrical power cord from
the wall outlet.
4-1. PANEL ASSEMBLY REPLACEMENT
Refer to the figure and proceed as follows :
(1) Unscrew and remove the screws fastening the back
cover and remove the back cover. (fig.1)
(2)Unwind the vinyl tape and disconnect the lead wires.
And disconnect the receptacle housing, if it is
connected. (fig.2)
Disconnect the plunger valve strap from the rod.
(fig.3)
connected. (fig.2)
Disconnect the plunger valve strap from the rod.
(fig.3)
(3) Unscrew and remove the screws fastening the
panel assembly. (fig.4)
(4) Lift up the panel assembly and lay it down on the
top. (fig.5)
To assemble the panel assembly to the body,
reverse the above disassembly procedure.
reverse the above disassembly procedure.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
NOTE
WP 830
29/8/04, 10:51 PM
6
Click on the first or last page to see other SW8D1 service manuals if exist.